*순정 카울에는 장착 불가합니다.
*장착에 관해서는 전문적인 지식·기술·차체 정비 등, 한가지 가능한 공구류가 필요하다, 각부의 추가 공사·조정 등도 필요한 제품입니다. [작업 시간은 약 2-3시간 정도 걸립니다]
*안전하게 장착하기 위해서도, 근처 가게들에서 구매하시고, 장착의 의뢰를 받기를 추천 드립니다.
그리고, 레이스 조절에 따라서는, 사용 불가의 경우도 있으므로, 미리에 확인하시고, 구입하세요..
*어퍼 카울에 대해서 가공이 필요합니다.
*순정 램 박스에 대해서 설치하는 가공이 필요합니다.
*화상 1은 왼쪽 위에서부터 램 덕트 조인트 램 에어 덕트·램 공기 흡입구입니다.
Material: FRP / Black (FB)
*As to FRP (white / black) products
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*Not compatible with stock cowl.
*Installation of this product requires specialized knowledge, skills, and tools that can be used for vehicle maintenance, as well as additional processing and adjustment of each part.[It will take approx. 2-3 hours]
*Recommending that you purchase the product at your local shop and ask them to install it for your safety.
*Also, depending on the race regulations, there may be cases where the product cannot be used, so please check and purchase beforehand...
*The upper cowl needs to be modified...
*Installation modification to the stock ram box is required.
*Image 1 shows the ram duct joint, ram air duct and ram air inlet from the upper left.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.