다소 길이 거칠고 있어도 달릴 수 있는 오프로드 바이크의 중에서도 가승리, 통근, 임도 투어링 등 폭넓게 사용할 수 세로 250.
핸들은 비교적 곧은 것에 가젯도 마운트하기 쉬운 형상으로 되어있습니다만, 오른쪽은 브레이크 마스터 실린더가 간섭하고 손잡이 부분이 배선을 고정하는 태국 랩이 장착되어 있어 스마트 폰 고리를 장착할 때는 제약이 있습니다.
핸들 오른쪽은 스로틀 와어어 등이 있는 관계로 장착을 할 수 없습니다. 왼쪽 전용입니다.
다소 높은 위치에 장착하기 위해서 스마트 폰 내비게이션 등의 시정은 양호합니다.
다른 많은 회사의 제품은 범용품이며 차종 전용 설계가 되지 않습니다. 그러나 범용품에서는 최대 하중을 보증할 수는 없습니다. 차종별 부착하는 방법을 검토하는 최적의 부재로 설치하는 방법을 선택하고 있어서, 내 하중 설정에 성공하고 있습니다.
기밀 하중은 650g까지 대응하는 설계로 했습니다. 650g은 구체적으로는 내비게이션 시스템과 설치 스테이. 음료 걸이, 500ml)정도가 됩니다. 스마트 폰과 스마트 폰 고리는 기종에 따라서도 달라지지만 약 350g이 됩니다.
◆ 바는 스틸의 양이온 도장 마무리
바 부분은 스마트 폰 고리의 탈착을 되풀이하는 것을 전제로 소재를 선정했습니다. 그래서 소재에는 경도에 뛰어난 스틸을 도입하여 내식성, 내습성이 뛰어난 등에 강한 양이온 도장에서 완성하고 있습니다.
◆ 클램프는 가벼운 알루미늄을 채용
바를 고정하는 부분은 경량으로 내식성이 뛰어난 알루미늄을 채용했습니다. 바를 검은 양이온 도장에서 마무리하고 있고 질감을 모두 클램프도 도장에서 완성하고 있습니다.
Among the off-road bikes that can run even if the road is a little rough, SEROW250 can be used widely for town riding, commuting, and forest road touring.
The handlebars are relatively straight, making it easy to mount gadgets, but the brake master cylinder interferes with the right side, and the handlebars are also fitted with cable tie to secure the wiring, so there are restrictions when installing a smartphone holder.
The right side of the handlebar cannot be installed due to the presence of throttle wires.For left side only.
Since it is mounted at a slightly higher position, the visibility of the smartphone navigation system is good.
Many other manufacturers' products are universal products and are not designed for specific vehicle models.However, the load capacity of universal products can not be guaranteed.The load capacity is set successfully by considering the installation method for each vehicle model and selecting the most suitable parts for installation.
The load capacity is designed to be up to 650g.The 650g is specifically for the navigation system and the mounting bracket.A drink holder and a 500ml drink.The phone and phone holder weighs about 350g, depending on the model.
◆Bar is steel with cationic paint finish
The material of the bar part was selected on the assumption that the smartphone holder will be repeatedly attached and detached.For this reason, steel with excellent hardness is used as the material, and it is finished with a cationic coating that has excellent corrosion resistance and moisture resistance and is resistant to rust.
◆The clamp is made of lightweight aluminum
The bar clamps are made of lightweight, corrosion-resistant aluminum.The bar is finished with black cationic paint, so the clamp is also painted to match the texture.