경량 휠로 달리기의 차이를 체감하라!
오토바이를 뜻대로 조종한다는 것이 가장 큰 영향을 준다고 해도 과언이 아니다 휠.
벨파스트의 컨셉이다 할리데이비슨에서 스포츠한다. 실현시키기 위해서는 꼭 필요한 부품이었던 휠이 할리용 커스텀 휠 '글라이드' 를 전개하는 주식회사 액티브와의 협업에 의해서 탄생했습니다.
■ 디자인
향수의 십자 단면 6개 스포크 디자인.
할리 데이비슨에 매치하는 십자 단면 6개 스포크 디자인을 채용. 향수 디자인면서 스포크의 각도가 60도가 된 6개 스포크는, 응력 분산이 좋았고 강성과 경량화를 추구하는 데 매우 균형 잡힌 구조 디자인과 성능을 양립하기 때문에 당도한 형상이라고 말할 수 있습니다. 머리 염색은, 옛것은 좋은 레이스 장면을 떠올리는 골드와, 발목을 다잡고 글로스 블랙의 2색을 설정.
세부에까지 매끈매끈한 라인
할리 데이비슨의 커스텀에 있어서, 성능을 손에 넣기 때문에, 외모를 타협한다는 것은 허락되지 않습니다. 일절 타협하지 않고 이 BG6의 디자인이 완성했습니다.
특히 허브주변의 매끄럽게 퍼지면서 일어서는 디자인은, 휠 전체의 볼륨을 내, 깊이를 연출하기 위한 중요한 포인트입니다.
■ 스펙
휠의 경량화가 운동 성능을 높인다.
오토바이의 "가속" ・ 감속. ・ '선회' 이 3가지 동작에 큰 영향을 끼친다는 게 바네하 중량. 바네하 중량 속에서도 큰 비중을 차지하는 것이 휠 중량입니다. 휠 중량을 덜기에서 운동 성능이 향상되어 오토바이를 뜻대로 조종하는 즐거움을 높일 수 있습니다.
[경량화와 강도확보를 양립하는 알루미늄 단조제법.]
휠의 경량화와 강도 확보라는 상반된 요건을 고차원으로 양립하는 것이 알루미늄 단조라는 제조법입니다.
일반적인 주조 휠은 강도 확보를 위해 림 부분에 어느 정도의 두께를 두는 설계입니다만, 단조 휠은 충분한 강도를 확보할 수 있기 때문에 림부의 두께를 최소한으로 할 수 있습니다. 회전하는 외주부가 가벼운 단조 휠은 자이로 효과가 약해져 코너링에서의 오토바이의 퀵한 넘어뜨림을 실현합니다.
할리데이비슨 정품 휠에도 채용되는 십자 단면 스포크. 예전부터 있었던 형상이지만, 실은 경량화와 강도 확보에 있어서 매우 합리적인 설계.
단조휠이기에 가능한 극한까지 림의 경량화. 주식회사 액티브가 자랑하는 게일 스피드. '글라이드' 알루미늄단조휠설계기술의결정입니다.
[높은 품질과 안전성.]
국토 교통성이 정하는 승용차용 경합금 디스크 휠 기술 기준. 일본 내에서 판매되는 알루미늄 휠에는 JWL (JWL-T) 마크를 표시할 의무 지워지고 있습니다. BG6도 물론 내 충격 강도나 내 피로 강도의 엄격한 검사를 받은 JWL규격을 걷어내고 있습니다. 또, 허브 아탓치멩토의 설치, 베어링의 압입, 바퀴의 움직임, 외관 검사는 숙련 직원에 의해서 이루어지며, 높은 품질과 안전성을 실현하고 있습니다.
[스포츠 스타에는 프런트 19인치, 리어 18인치에서.]
스포츠 스타를 더 스포티하게 하려고 선택한 것이 프론트 19인치, 리어 18인치. 2016년에 발매된 XL1200CX로드스터에도 채용되고 있는 리어 18인치는, 왕년의 카페 레이서를 연상시키는 실루엣으로 스포츠 스타의 이미지에 큰 변화를 가져옵니다. 또, 리어의 림 폭을 4.0인치라고 하는 것으로, 최대 150폭까지 타이어를 장착 가능. 타이어 선택의 폭도 넓어집니다.
■휠사이즈
프런트:250-19 (권장 타이어 크기:100/90-19)
리어:400-18 (권장 타이어 크기:150/70-18)
Experience the difference in driving with lightweight wheels!
It is no exaggeration to say that the wheel has the greatest impact on the ability to control a motorcycle at will.
In order to realize Belfast's concept of "Sporting on Harley-Davidson", the wheel was a necessary part, and it was born by the collaboration with Active Co.
■Design
Nostalgic cross-section 6-spoke design.
Cross-sectional 6-spoke design is adopted to match Harley-Davidson.Despite the nostalgic design, the 6-spoke design with a 60-degree angle provides excellent stress distribution and a well-balanced structure for pursuing rigidity and weight reduction.It is a shape that has been arrived at in order to achieve both design and performance.Two colors are available: gold, reminiscent of the good old days of racing, and gloss black to enhance the feet.
Smooth lines with attention to detail.
In the customization of Harley-Davidson, it is not allowed to compromise the looks in order to get the performance.The design of the BG6 was completed without any compromise.
In particular, the design of the hub area, which spreads out smoothly and rises up, is an important point to produce the volume and depth of the entire wheel.
■Specifications
Lighter wheels improve performance.
The unsprung weight of a motorcycle has a great influence on these three actions: acceleration, deceleration, and turning.The weight of the wheel is the largest part of the weight under the spring.By reducing the weight of the wheel, the performance of the motorcycle is improved and the enjoyment of riding the motorcycle at will is enhanced.
[Aluminum forging process for both weight reduction and strength assurance.]
Forging aluminum is a process that achieves a high level of compatibility between the conflicting requirements of reducing wheel weight and securing strength.
In general, cast wheels are designed to have a certain amount of thickness in the rim section in order to secure strength, but forged wheels can secure sufficient strength, so it is possible to minimize the thickness of the rim section.A forged wheel with a lighter spinning circumference reduces the gyroscopic effect and makes the motorcycle quicker in cornering.
The cross-section spokes used on genuine Harley-Davidson wheels.Although it is a traditional shape, it is actually a very reasonable design for weight saving and strength securing.
Forged wheels make it possible to reduce the weight of the rim to the utmost limit.This is the culmination of Active's "Gailspeed" and "Glide" forged aluminum wheel design technology.
[High quality and safety.]
In accordance with the "Technical Standards for Light Alloy Disc Wheels for Passenger Cars" set forth by the Ministry of Land, Infrastructure, Transport and Tourism, aluminum wheels sold in Japan are required to display the JWL (JWL-T) mark.Of course, BG6 is also tested for impact and fatigue resistance, and has passed the JWL standard.The installation of hub attachments, press fitting of bearings, wheel runout, and appearance checks are performed by skilled staff to ensure high quality and safety.
[19 inches front, 18 inches rear on the Sportster.]
To make the Sportster more sporty, I chose 19 inches front and 18 inches rear.Also available on the XL1200CX Roadster in 2016, the rear 18-inchers bring a big change to the Sportster's image with a silhouette reminiscent of the café racers of yesteryear.The rear rim width is 4.0 inches, which allows for tires up to 150 wide to be mounted.You can also choose from a wide range of tyres.
Wheel size
Front :250-19(Recommended tire size:100/90-19)
REAR:400-18(Recommended tire size :150/70-18)