고강도, 높은 강성의 올 스테인리스 펜더
[취기품]
SR카페 레이서 스타일의 고품질 커스텀 파트를 다수 핸드 메이드로 제작하는 CHUCKBOX산 프론트 펜더.
쇼트 펜더/유형 II펜더와 비교, 부드러운 이탈리아 차적인 디자인이 특징인 프론트 펜더입니다.
스테이부는 두툼한 2.0㎜, 10Φ의 스테인리스 강을 사치에 사용하는 수곡게 제작하고 있습니다.
심플하고 아름다운 호쾌한 것입니다.
스테이 플레이트부는 3.0㎜이고, SR의 경우는 스테이의 다리가 길기 때문에, 볼트 구멍의 긴 구멍은 비 채용에서 9.0Φ 환혈을 열강도를 확보하고 있습니다.
아치 형태에 수곡게된 두툼한 스테인리스 파이프와 플레이트 부분의 처리로, 일반적인 평판 스테이의 펜더와 비교하면 프런트 포크의 비틀림 강성이 현격히 향상합니다.
펜더 본체는, 좌우 안에 안전 면에서도 효과가 있는 리브를 마련하고, 깊은 아치와 함께 본체의 강도를 내고 있습니다.
초내구성을 확보하기 위해펜더들과 스테이를 멈추고 볼트는, 6mm캡 볼트를 채용, 상하로 평왓샤을 넣고 U너트 (쇄정 장치 너트) 그래서 갈등에 대한 대응도 완벽합니다.
펜더들과 스테이를 멈추고 플레이트는 3.0mm두께 플랫을 아치 파이프에 전주 용접하고 있습니다.
양산형에게 흔히 있는, 비용 절감적 만드는 방법은 없습니다
척 박스의 핸드 메이드로 매우 정중하게.
High strength, high rigidity all stainless steel fender
[Back-order item]
Front fender made by CHUCKBOX which is handmade many high quality custom parts for SR cafe racer style.
Compared to the Short Fender / Type II Fender, this front fender features a softer Italian vehicle-like design.
The bracket part is made of 2.0mm thick 10Φ stainless steel pipe and hand-bent by hand.
It is simple, beautiful and bold.
The bracket plate is 3.0mm and the bolt holes are 9.0Φ round holes to secure the strength because the bracket legs are longer on SR.
The thick stainless steel pipe is hand-bent into an arch shape, and the treatment of the plate section greatly improves the torsional rigidity of the front fork when compared to a standard flat bracket fender.
The fender body has ribs on the inside of the right and left sides for safety, and the deep arches give strength to the body.
The bolts that hold the fender body and brackets together are 6mm cap bolts for extra durability, with flat washers on the top and bottom and U-nuts (anti-loosening nuts) for perfect torsion resistance.
The plate that holds the fender body and the bracket is 3.0mm thick flat welded to the arch pipe all around.
There is no cost-cutting method, which is common in mass production.
Handmade by Chuck Box and very carefully.