[ 부드럽게 드라이브 시스템]
차종에 최적인 세트를 벌이고 있는 원활 드라이브 시스템.
인슐레이터 밴드나 인젝션 볼트, 에어 클리너 박스, 서스펜션 등
대전하는 정전기를 제전·방전, 유체가 통과를 원활하게 하는 시스템입니다.
스무드 드라이브 시스템은 이른바 튜닝 파츠라고 생각하지 않아.
원래 거느리던 문제를 해결의 방향에 가져가는 부품입니다.
도요타의 알루미늄 테이프의 발표 이후, 일반 이용자도 정전기가 문제 같다는 인식이 이루어지게 되었는데
30년 이상 전부터 정전기 관련 상품들은 차량용에서는 여러가지 제품이 있었지만 나오고 사라지고는 사라지는 반복이었어요.
순조롭게 드라이브 시스템에 포함되는 볼트·너트는 첨단의 깔쭉깔쭉하돌기에서 공중 방전 (코로나 방전) 그래서 정전기를 제거합니다.
정전기는+의 전하,-. 어느 한쪽이 남아돌아서는 상태입니다.
그 상태는 물질이 " 움직인다" 시점에서 온갖 상황에서 항상 발생합니다.
닳고 돌아간 다음에 흐르는, 휘는, 온도차, 단 순간에+-로 중화하고 접지하거나로 없어지기도 합니다.
정전기는 가급적 발생한 곳에서 제거하는 것이 효과적입니다.
정전기를 이동시키고 제거도 있지만, 그 이동 경로상에 있는 모든 것에 영향을 미칩니다.
정전기의 통로에 서스펜션이 있는 영향을 받고 움직임이 나빠질 수도 있습니다.
흡기계에서는, 외기 도입, 흐름, 혼합기의 엔진 유입의 저항이 되고 있습니다.
이른바 돈 쯔킨다는 현상은 혼합기가 대전한 인슐레이터의 정전기에 끌려가고 부드럽게 엔진에 들어갈 수 없겠죠.
어느 곳에서 흡입력에 져서 단숨에 들어가므로 탕 찧기에 되어 버리고, 인슐레이터의 정전기를 제거하는 수지로 조금씩 혼합 신경을 들이면 돈 있기는 적게 됩니다.
돈 있기는 시차도 있습니다. 돈 운수가 아니라는 것은 빠른 시점에서 가속할 수 있다는 것도 됩니다.
빠른 시점에서 부드럽게 가속할 수 있다는 것은, 지금까지보다도 악셀을 열지 않고도 목표 속도에 이릅니다.
부드럽게 뛰게 되면 편하고 안전하고, 악셀 발산각이 적고, 또는 열리고 있는 시간이 적어지면 자연히 연비도 올라갑니다.
빠른 시점에서 가속이 가능하면 시간도 올라갑니다. 전기 모터 차가 시간이 좋은 것은 이 부분의 요소가 클 것입니다.
이 인슐레이터의 서전을 하는 것이 인슐레이터 밴드 볼트
원래 인슐레이터 밴드 볼트를 교환할 뿐입니다.
인슐레이터에 고무를 사용하는 내연 기관 반드시 휴대하고 있습니다.
인젝터 카뷰레터에 관해서는, 보디 자체에 정전기가 쌓여서 연료가 이상적으로 불지 않는 경우를 방지합니다.
흡기도 에어 크리너 케이스와 흡입 파이프가 플라스틱인 한 휴대하고 원활한 수입이 없습니다.
순조롭게 인덕션 ( 검은 색의 제거 전망) 이 케이스의 정전기를 제거합니다.
설치하지 못하는 경우의 부분은 투 웨이 코트를 도포하면 정전기 발생을 억제합니다.
[Smooth drivetrain]
Smooth Drive Systems has developed the most suitable set for each model.
Insulator band, injection bolt, air cleaner box, suspension, etc
This system eliminates and discharges the static electricity and makes the fluid pass through smoothly.
Smooth Drivetrain is not considered as a tuning part.
It is a part that brings the original problem to a solution.
Since the announcement of Toyota's aluminum tape, the general public has come to recognize that static electricity is a problem,
For more than 30 years, there have been various static electricity-related products for vehicle, but they have been repeatedly released and disappeared.
The bolts and nuts included in the Smooth Drivetrain eliminate static electricity by aerial discharge (corona discharge) from the serrated protrusions on the tips.
Static electricity is a state in which there is an excess of either + charge or - charge.
That state always occurs in every situation when matter "moves".
Rubbing, spinning, flowing, bending, temperature difference, but it can be neutralized instantly by +- or grounding and disappear.
It is best to remove static electricity at the point where it is generated.
Removing static electricity can be done by moving it, but it will affect everything along its path.
The suspension is in the path of static electricity and may be affected, resulting in poor movement.
In the intake system, it resists the introduction and flow of outside air and the inflow of the air mixture into the engine.
The so-called "thump" is probably caused by the static electricity of the insulator pulling the air mixture and preventing it from entering the engine smoothly.
If the static electricity of the insulator is removed and the air mixture enters gradually, the sticking will be less.
Thump also leads to a time lag.The lack of thump also means that you can accelerate early on.
The ability to accelerate smoothly from an early stage means that you can reach your target speed without having to open the accelerator more than before.
If you can drive smoothly, it is easy and safe, and if you open the accelerator pedal less, or open it less time, fuel consumption will naturally increase.
The earlier you can accelerate, the better your time will be.This is one of the main reasons why electric motor vehicle have better times.
The insulator band bolts are used to slow down the power of the insulator
Just replace the original insulator band bolts!It is.
Internal combustion engines that use rubber insulators are always electrically charged.
As for injectors and carburetors, it prevents static electricity from accumulating on the body itself and preventing the fuel from blowing ideally.
As long as the air cleaner case and intake pipe are made of plastic, the intake air will be charged and will not be smooth.
Smooth Induction (black static dissipative mesh) removes static electricity from the case.
For the parts of the case that cannot be installed, apply Two Way Coat to reduce static electricity generation.