경기 차량용 AR1모타ー도 휠과 같은 스펙의 부품 구성으로 만들 휠 키트.
모타ー도 전용 설계의 Z-WHEEL산 M50림, 아스테 라이트 허브, 알루미늄 촉 루셋토, 스테인리스 스포크 세트를 조합한 컴플리트 모타ー도 휠 키트.
[M50림]
강도 비례가 우수 A7000계 소재로 만들어진 슈퍼 모타ー도 전용 설계의 림.
프런트 리어 휠 함께 17인치를 설정.
[아 스테 라이트 허브]
원통형의 고강도 알루미늄 합금을 10분의 1의 무게까지 고정 밀도에 모두 깎아 내는 가공함으로써 아름다운 외관을 유지하면서도, 강도와 경량화를 중시한 디자인.
베어링 등의 내부 부품은 모두 압입 후.
[알루미늄 니플&스테인리스 스포크]
Z-WHEEL고강도 알루미늄 합금 니플을 도입하여 순정 스틸 니플과 비교하여 경량화에도 공헌.
Z-WHEEL고강도 스테인리스 스포크 세트를 채용.
[모터크로서용을 피드백한 허브 설계]
모터크로서용 허브 설계를 DRZ400S/SM용으로 피드백.
고강도 알루미늄 합금을 총 깎는 가공하기 때문에, 순정의 주조제 허브와 비교하고 강도가 높은 경량화를 달성.
2004년 이후의 차량은, 허브 댐퍼를 배제한 설계 때문에 보다 경량으로 직접적인 느낌을 얻을 수 있다.
This wheel kit is constructed with the same specification parts as the AR1 Motard wheels for competition vehicles.
Complete Motard wheel kit with Z-WHEEL M50 rims, Asterite hubs, aluminum nipple set and stainless steel spoke set designed specifically for Motard.
[M50 rim]
Specially designed rims for Supermotard, made of A7000 series material with excellent strength balance.
Both front and rear wheels are 17 inches.
[Asterite hub]
The cylindrical high-strength aluminum alloy is machined to 1 / 10th of its original weight with high precision, and the design emphasizes strength and weight reduction while maintaining a beautiful appearance.
All internal parts such as bearings are press-fitted.
[aluminum nipples & stainless steel spokes]
Z-WHEEL High strength aluminum alloy nipple is adopted, which contributes to weight reduction compared to the stock steel nipple.
Z-WHEEL high strength stainless steel spoke set is adopted.
[Hub design with feedback for motocrossers]
The hub design for motocrosser is fed back to DRZ400S / SM.
Since the hubs are machined from high-strength aluminum alloy, they are stronger and lighter than the stock cast hubs.
2004 and later vehicles are designed without hub dampers, so they are lighter and have a more direct feeling.