경기 차량용 AR1모타ー도 휠과 같은 스펙의 부품 구성으로 만들 휠 키트.
모타ー도 전용 설계의 Z-WHEEL산 M50림, 아스테 라이트 허브, 알루미늄 촉 루셋토, 스테인리스 스포크 세트를 조합한 컴플리트 모타ー도 휠 키트.
[M50림]
강도 비례가 우수 A7000계 소재로 만들어진 슈퍼 모타ー도 전용 설계의 림.
프런트 리어 휠 함께 17인치를 설정.
[아 스테 라이트 허브]
원통형의 고강도 알루미늄 합금을 10분의 1의 무게까지 고정 밀도에 모두 깎아 내는 가공함으로써 아름다운 외관을 유지하면서도, 강도와 경량화를 중시한 디자인.
베어링 등의 내부 부품은 모두 압입 후.
[알루미늄 니플&스테인리스 스포크]
Z-WHEEL고강도 알루미늄 합금 니플을 도입하여 순정 스틸 니플과 비교하여 경량화에도 공헌.
Z-WHEEL고강도 스테인리스 스포크 세트를 채용.
[와이드 슬림 사양]
XR250MOTARD의 정품 휠 크기 프론트 3.00X17야 3.50X17에 대해서, AR1모타ー도 휠 키트는 프론트 3.50X17야 4.50X17의 와이드 슬림 사양으로 타이어의 선택지가 늘어, 투어링에서 레이스까지 폭넓게 대응.
[모터크로서용을 피드백한 허브 설계]
XR계열의 정품 휠은, 바퀴살의 투입이 모터크로서와 다르기 때문에 수평 강성이 낮은 것이다.
AR1휠 키트는 모터크로서용 허브 설계를 피드백함으로써, 가로 강성을 높일 뿐만 아니라, 순정 허브와 비교하고 전후에서 약 700g의 경량화를 달성.
This wheel kit is constructed with the same specification parts as the AR1 Motard wheels for competition vehicles.
Complete Motard wheel kit with Z-WHEEL M50 rims, Asterite hubs, aluminum nipple set and stainless steel spoke set designed specifically for Motard.
[M50 rim]
Specially designed rims for Supermotard, made of A7000 series material with excellent strength balance.
Both front and rear wheels are 17 inches.
[Asterite hub]
The cylindrical high-strength aluminum alloy is machined to 1 / 10th of its original weight with high precision, and the design emphasizes strength and weight reduction while maintaining a beautiful appearance.
All internal parts such as bearings are press-fitted.
[aluminum nipples & stainless steel spokes]
Z-WHEEL High strength aluminum alloy nipple is adopted, which contributes to weight reduction compared to the stock steel nipple.
Z-WHEEL high strength stainless steel spoke set is adopted.
[wide rim version]
Compared to the XR250MOTARD's stock wheel size of 3.00X17 front and 3.50X17 rear, the AR1 Motard wheel kit has a wider rim of 3.50X17 front and 4.50X17 rear, giving you more tire options for everything from touring to racing.
[Hub design with feedback for motocrossers]
The stock wheels of the XR series have low lateral rigidity due to the different spoke construction from that of motocrossers.
The AR1 wheel kit uses the hub design for motocrossers as feedback to not only increase lateral rigidity, but also achieve a weight reduction of approximately 700g front and rear compared to the stock hubs.