최근의 배기 가스 규제에 의한 아이돌 부근에서 중속 역의 A/F값이 줄어들고 있습니다.
그 때문에 정상 차량 저회 전 회전력 부족과 "돈이 " 감이 발생합니다.
머플러 교환을 하면 훨씬 얇은 상태가 되는 최악의 경우, 엔진을 상하게 됩니다.
거기서 RAPiDBIKE가 고안한 커플러 온 모듈의 새로운 응답입니다!
엔진 파워 개선, 토오크 부족의 개선, 연비 개선에 최적.
이상 하늘 연비는 엔진의 보호에도 필요한 작업입니다.
장착할 뿐 OK의 간단한 모듈입니다.
키트는 업체 권장의 최적치로 설정되고 있습니다.
차종별로 전용 하네스가 부속되어 있으므로 설치도 쉽다!
본체, 하네스는 전자장 적합성이 좋았고 충격과 진동, 고온 방수성 등 엄격한 기준을 테스트하고 있으므로 장면을 뽑다 없이 최고의 퍼포먼스를 발휘합니다!!
Due to the recent exhaust gas regulation, the A / F value from idle to mid speed range is getting thinner.
This will cause a lack of low RPM torque and a "thumping" feeling in stock vehicles.
If you replace the exhaust, it will be even thinner and in the worst case, it will damage the engine.
That's why RAPiD BIKE has come up with a new answer for coupler-on modules!
Best for improvement of engine power, lack of torque and fuel consumption!
Ideal fuel economy is also necessary to protect the engine.
It is a simple module to install.
The kit has been set to the optimum values recommended by the manufacturer.
Special harness is included for each model, so installation is easy!
The main body and harnesses have been tested for electromagnetic compatibility, shock and vibration, high temperature and water resistance, and other strict standards, so you can get the best performance in any situation!!!