스마트 폰이나 USB충전기, 나비 등 복수의 가젯을 마운트하는 바를 만들었습니다.
월드 워크는 시정의 좋은 장소에 스마트 폰을 마운트 하기 위해서 바를 발표하고 있습니다.
매우 호평을 받고 있지만, 이벤트 등에서 고객의 오토바이를 보면 복수의 가제트 (편리한 소품) 을 핸들 주위에 마운트 하는 것을 볼 늘고 있습니다.
그러나 최근 테이퍼 핸들을 채용하고 있는 차량도 많아졌고 손잡이 지름이 일정하지 않으니 장비의 장착이 어렵거늘 스쿠터 등은 고정하는 핸들이 노출되지 않은 차종이 많아 핸들 마운트의 장비가 장착할 수 없습니다.
또 핸들 형상도 곧지 않아서 설치에 고생할 때도 있습니다.
거기서 월드 워크가 개발한 것이 복수의 가젯을 마운트 하는 것을 목적으로 개발한 바
멀티 가젯 마운트 바입니다.
[복수 가젯을 마운트 하는데 최적인 강성, 설계를 도입하였습니다]
스마트 폰이나 음료수 홀더, USB충전기, 내비게이션 시스템 등 핸들 주위에 마운트 해서 사용하는 가젯은 늘어났고, 쾌적하게 오토바이를 타기 때문에 복수의 가젯을 마운트 해서 사용하는 유저가 증가 경향에 있는 것은 전술한 대로입니다.
멀티 가젯 마운트 바는 차종별로 부착하는 방법이 약간 다르지만 복수의 가젯을 마운트 해도 문제 없는 강도를 확보하는 바 본체는 국산 핸들과 같은 22.2Φ을 채용.
오토바이용 장비면 대부분의 제품을 마운트 하는 것이 가능합니다.
차체와의 간섭 등을 피하기 위해서 차종별로 바의 길이는 다르지만 3-5개 정도의 가젯을 마운트 하는 것을 상정하고 있습니다.
[미터의 시인성을 충분히 배려하여 설계하였습니다]
미터에는 속도나 휘발유 잔량, 오도미터 등 중요한 인포메이션이 표시됩니다. 그렇기 때문에 가젯트를 장착했을 때 미터의 시인성이 나빠지는 것은 피하고 싶은 것입니다.
가젯을 장착하는 위치는 연구해야 하지만, 가능한 미터의 시인성이 나빠지지 않는 위치에 바가 오도록 조정했습니다.
[핸들을 풀로 꺾어도 탱크에 맞기 어려운 설계입니다]
핸들을 모두 잘랐을 때 스위치 박스와 휘발유 탱크의 클리어런스가 좁은 오토바이는 많이 있습니다.
그래서 핸들바에 직접 가젯을 마운트 한다고 간섭하고 버리는 리스크가 있습니다.
멀티 가젯 바는 핸들 바에서 가젯을 마운트 하는 바가 높은 위치에 되도록 하고 있으므로 간섭하지 않고 나병 설계입니다.
가젯의 탈착을 되풀이하는 것을 전제로 설계해서 바 본체 부분은 딱딱한 인쇄가 다 되다에 강한 스틸을 채용한 양이온 도장에서 완성하고 있습니다.
밀착성이 뛰어난 두꺼운 도막을 형성할 수 있어, 방수, 부식 방지 효과가 높은 도장입니다.
바를 고정하는 부분은 경량으로 부식에 강한 알루미늄을 뽑아 도장에서 완성하고 있습니다.
바 끝 부분에는 플라스틱 캡을 채용.
우천 시에 물 등이 들어가는 것을 막습니다.
모든 소재를 같이 하는 것이 아니라 장소에 의해서 최적인 소재를 선택하고 있습니다.
A bar is made to mount multiple gadgets such as a phone, USB charger, navigation system, etc.
World Walk has released a bar to mount your smartphone in a highly visible location.
It has been very popular, but when World Walk sees customers' bikes at events, World Walk has seen more and more gadgets (useful accessories) mounted around the handlebars.
However, in recent years, the number of vehicles with tapered handlebars has been increasing, and the diameter of the handlebars is not constant, making it difficult to install gadgets, and many scooters do not have exposed handlebars for clamping, so handlebar-mounted gadgets cannot be installed.
Also, the shape of the handlebar is not straight, so it may be difficult to install.
Therefore, World Walk has developed a bar that can be used to mount multiple gadgets.
Multi-gadget mounting bar.
[It incorporates a rigid design that is ideal for mounting multiple gadgets]
The number of gadgets that can be mounted around the handlebars, such as smartphones, drink holders, USB chargers and navigation systems, is increasing, and as mentioned above, the number of users who mount multiple gadgets in order to ride their bikes comfortably is on the rise.
The multi-gadget mount bar has a slightly different installation method depending on the model, but it is strong enough to mount multiple gadgets, and the bar body is made of Φ22.2 the same material as Japanese handlebars.
Most of the gadgets for motorcycles can be mounted.
In order to avoid interference with the vehicle body, the length of the bar varies depending on the model, but it is designed to mount about 3-5 gadgets.
[World Walk has designed the meter with full consideration for its visibility]
The meter displays important information such as speed, gasoline level and odometer.Therefore, you don't want to lose visibility of the meter when you install the gadget.
Although the position of the gadget has to be considered, World Walk has adjusted the bar so that the visibility of the meter is not deteriorated as much as possible.
[It is designed so that it does not hit the tank even when the handlebar is turned fully]
There are many bikes where the clearance between the switch box and the petrol tank is too narrow when the handlebars are turned fully up.
Therefore, if you mount the gadget directly on the handlebar, there is a risk of interference.
The multi-gadget bar is designed so that the gadget mounting bar is higher than the handlebar to prevent interference.
The bar unit is made of hard, abrasion-resistant steel and finished with a cationic coating because it is designed for repeated attachment and removal of gadgets.
This coating is highly effective in preventing rust and corrosion because it can form a thick coating film with excellent adhesiveness.
The bar clamps are made of lightweight, corrosion-resistant aluminum and finished with paint.
The bar ends have plastic caps.
Prevents water from entering in case of rain.
Not all the materials are the same, but the most suitable material is selected according to the location.