Used a set of these bases to mount aftermarket turn signals on the front of on my Kawasaki Z900RS Cafe. Great product! Bases fit the inside opening where the stock turn signals were located and the hole size was just large enough for the mounting shaft on the new signals.
View Detail
- Instock
5.39 USD (800 JPY)
Webike Point: +8 pt
(0.05 USD)
Delivery Information
In Stock, Ships within 24 hours.
Estimated arrival date around
FITMENT
KAWASAKI
Open Fit Model Information Table
-
Ninja 1000
18-20 [Year]12/13 ABS [Model]ZX1000HCF/HDF
-
ER-6n
19 [Year]12/13/14 [Model]ER650ECF/EDS/EEF Front and rear/2 products are required.
-
Ninja 250
15 [Year]18/19/20 [Model]EX250PJF/PJFA/PKF/PKFA/PLFA Rear side only, one product is required.
-
Ninja 1000
19-20 [Year]11/12/13 [Model]ZX1000GBF/GCF/GDF Rear side only, one product is required.
See all
KAWASAKI
Product detail
[Color] Black finish
[Material] ABS
[Size] M8 bolt hole
[Components]
・Mount Base Body
・Instruction Manual
**This product is usually finished with M8 diameter hole at the time of shipment, but since it is made of resin material, you can expand the shaft size to M10 by cutting the screw.
*One set of this product is equivalent to two blinkers.If you need both front and rear, you need two sets.
*When using this product with LED blinkers, it is recommended to use KIJIMA's IC blinker relay (part number: 304-052, 304-0526, 304-0533, 304-0534, etc.) are required.
*Installation position: Before installing this product, you need to remove the both stock front and rear cowls and stock number mount, and modify blinker wiring.If you are unsure, it is strongly recommended that you contact your local KAWASAKI dealer or vehicle dealer to work.
.
New blinker mounting base for popular older Kawasaki models!
When installing the blinkers that use the general purpose blinker shafts M8 diameter and M10 diameter, the finish will be comparable to the stock blinker mounts so it will be a smart finish!
The stock blinker hole is often shaped like the stock blinker due to the improvement of manufacturing technology in recent years.
The new manufacturing process has resulted in many cool blinkers that fit beautifully in the stock configuration, but it's always boring for bikers and Kawasaki riders when everyone else has the same blinkers.
This item is a must-have when replacing your blinkers, as it allows you to install many external blinkers when you start with custom blinker replacements to make your vehicle your own, one-of-a-kind machine!
-List of blinker and blinker shaft brackets that can be installed on Kijima part number #217-2037
219-1016 Blinker Lamp Vanette Small M / A Single 2PCS SET
219-1018 Blinker Lamp Vanette Small M / C Single 2PCS SET
219-1020 Blinker Lamp Vanette Small FB / A Single 2PCSET
219-1022 Blinker Lamp Vanette Small FB / C Single 2PCSET
219-1061 Blinker Lamp Starmine B2 M / A 12V23W
219-1090 Blinker Lamp Starmine B4 Anodized B / A 12V23W
219-1091 Blinker Lamp Starmine B4 Anodized B / C 12V23W
219-1096 Blinker Lamp Starmine B5 Anodized B / A 12V23W
219-1097 Blinker Lamp Starmine B5 Anodized B / C 12V23W
219-1098 Blinker Lamp Sky Flat M / M 12V23W
219-1099 Blinker Lamp Starmine B6 M / M 12V23W
219-1100 Blinker Lamp Starmine B6 Anodized BB / S 12V23W
219-1101 Blinker Lamp Starmine B6 Anodized BG / S 12V23W
219-1105 Blinker Lamp Starmine B7 B / B 12V 23W 2PCS SET
219-1107 Blinker Lamp Starmine B8 Plated 12V 23W 2PCS SET
219-1108 Blinker Lamp Starmine B8 Black 12V 23W 2PCS SET
219-1112 Blinker Lamp GRILL Black LED 2PCS SET
219-1113 Blinker Lamp Starmine B7 M / M 12V 23W 2PCS SET
219-1114 Blinker Lamp EVES M / M 12V 23W 2PCS SET
219-1115 Blinker Lamp Eebs B / S 12V 23W 2PCS SET
219-5108 Blinker Lamp Cat's Eye SP M / A 2PCS SET
219-5109 Blinker Lamp Cat's Eye SP B / A 2PCS SET
219-5130 Blinker Lamp MAT Type Black LED12V 1W 2PCS SET
219-5138 Blinker Lamp Arrow Type Black LED12V 1W 2PCS SET
219-5154 Blinker Lamp TR LED Clear 12V 1W 1pc
219-5155 Blinker Lamp TRL LED Clear 12V 1.2W 2pcs
219-5156 Blinker Lamp TRL LED Smoked 12V 1.2W 2pcs
219-5167 Blinker Lamp Mini Square- M / A 12V 10W 2PCS SET
219-5168 Blinker Lamp Mini Square - M / C 12V 10W 2PCS SET
219-5169 Blinker Lamp Mini Square- B / A 12V 10W 2PCS SET
219-5170 Blinker Lamp Mini Square- B / C 12V 10W 2PCS SET
219-5175 Blinker Lamp TRL2 LED Clear 12V 1.2W 2pcs
219-5177 Blinker Lamp TR Sequential LED Clear 12V 5.3W 2pcs
219-5178 Blinker Lamp TRX Sequential LED Clear 12V 1.4W 2pcs
219-5181 Blinker Lamp TRD LED Sequential 12V 3.5W 2pcs
219-5182 Blinker Lamp TRD LED Sequential & Tail Combination 12V 2.7W 2pcs
217-1005 BLINKER BRACKET BLACK 56 x 26mm *M10 2pcs SET
217-1006 BLINKER BRACKET PLATED 56 x 26mm *M10 2pcs SET
217-1007 BLINKER BRACKET BLACK 56 x 26mm *M10 4pcs SET
217-1008 BLINKER BRACKET PLATED 56 x 26mm *M10 4pcs SET
217-1009 BLINKER BRACKET BLACK 88 x 34mm *M10 2pcs SET
217-1010 BLINKER BRACKET PLATED 88 x 34mm *M10 2PCS SET
217-1012 BLINKER BRACKET PLATED 88 x 34mm *M8 2pcs SET
217-1014 BLINKER BRACKET PLATED 56 x 26mm *M8 2pcs SET
217-1016 BLINKER BRACKET PLATED 56 x 26mm *M8 4pcs SET
217-1017 BLINKER BRACKET PLATED 73 x 18mm *M10 2PCS SET
217-1020 BLINKER BRACKET PLATED 46 x 16mm *M8 2pcs SET
217-1031 BLINKER BRACKET PLATED 45 x 15mm *M10 2pcs SET
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
KAWASAKI
- NINJA250 (EX250)
- NINJA250 (EX250)
- VERSYS-X 250 ABS TOURER
- VERSYS-X 250 ABS TOURER
- Z250 (2013-)
- NINJA250 (EX250)
- NINJA400 (2014-)
- NINJA400 (2014-)
- NINJA400 (2014-)
- NINJA400R (ER-4f) (-2013)
- NINJA400R (ER-4f) (-2013)
- Ninja ZX-6R
- Ninja ZX-6R
- ER-6n
- ER-6n
- NINJA650
- NINJA650
- NINJA650
- NINJA650
- NINJA650R (ER-6f)
- VERSYS650
- VERSYS650
- Z650
- Z800
- Z900
- Z900RS
- Z900RS CAFE
- Ninja1000 (Z1000SX)
- Ninja1000 (Z1000SX)
- Ninja1000 (Z1000SX)
- VERSYS1000
- Z1000 (Water-cooled)
- ZRX1200 DAEG
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:KAWASAKI Z1000 19-21 [Year]10/11/12/13 [Model]ZR1000DAF/DBF/DCF/DDF/DDFA Rear Side Only 1 product is required., KAWASAKI Z900RSCAFE 16 [Year]18/19/20 [Model]ZR900EJF/EKF/ELF/ELFA Front and rear/products require 2 pieces., KAWASAKI ZRX1200DAEG 15 [Year]09/10/11/12/13/14/15/16 [Model]ZR1200D9F/D9FA/DAF/DBF/DCF/DCFA/DDF/DDFA/DEF/DEF/DEFA/DFF/DFFA/DGF/DGFA/DGFA/DGFB Front and rear/2 pieces of product are required., KAWASAKI Ninja 250 18 [Year]13/14/15/16/17 ABS [Model]EX250, KAWASAKI Z900RS 18-21 [Model]ZR900CJF/CJFA/CKF/CKFB/CLF/CLFB Front/Rear/Product requires 2 pcs.
Installed on: KAWASAKI Z900RS CAFE
Fits:KAWASAKI Z1000 19-21 [Year]10/11/12/13 [Model]ZR1000DAF/DBF/DCF/DDF/DDFA Rear Side Only 1 product is required., KAWASAKI Z900RSCAFE 16 [Year]18/19/20 [Model]ZR900EJF/EKF/ELF/ELFA Front and rear/products require 2 pieces., KAWASAKI ZRX1200DAEG 15 [Year]09/10/11/12/13/14/15/16 [Model]ZR1200D9F/D9FA/DAF/DBF/DCF/DCFA/DDF/DDFA/DEF/DEF/DEFA/DFF/DFFA/DGF/DGFA/DGFA/DGFB Front and rear/2 pieces of product are required., KAWASAKI Ninja 250 18 [Year]13/14/15/16/17 ABS [Model]EX250, KAWASAKI Z900RS 18-21 [Model]ZR900CJF/CJFA/CKF/CKFB/CLF/CLFB Front/Rear/Product requires 2 pcs.
Installed on: KAWASAKI Z900RS CAFE
Apr 9, 2022
Used these bases to install aftermarket turn signals on my Kawasaki Z900rs and they are a perfect fit. Takes 2 bases per turn signal, one for the outside and one piece for the inside. Opening for my aftermarket turn signals was was perfect diameter for the turn signals I used to replace the stock turn signals.
View Detail
Helpful?
Fits:KAWASAKI Z1000 19-21 [Year]10/11/12/13 [Model]ZR1000DAF/DBF/DCF/DDF/DDFA Rear Side Only 1 product is required., KAWASAKI Z900RSCAFE 16 [Year]18/19/20 [Model]ZR900EJF/EKF/ELF/ELFA Front and rear/products require 2 pieces., KAWASAKI ZRX1200DAEG 15 [Year]09/10/11/12/13/14/15/16 [Model]ZR1200D9F/D9FA/DAF/DBF/DCF/DCFA/DDF/DDFA/DEF/DEF/DEFA/DFF/DFFA/DGF/DGFA/DGFA/DGFB Front and rear/2 pieces of product are required., KAWASAKI Ninja 250 18 [Year]13/14/15/16/17 ABS [Model]EX250, KAWASAKI Z900RS 18-21 [Model]ZR900CJF/CJFA/CKF/CKFB/CLF/CLFB Front/Rear/Product requires 2 pcs.
Jun 23, 2021
I think it could have been made of steel if I wanted.
It's not like it's cheesy with a crazy Plastic feel.
Chaft, used with Sphere Light Blinker installation
Helpful?
Fits:KAWASAKI Z1000 19-21 [Year]10/11/12/13 [Model]ZR1000DAF/DBF/DCF/DDF/DDFA Rear Side Only 1 product is required., KAWASAKI Z900RSCAFE 16 [Year]18/19/20 [Model]ZR900EJF/EKF/ELF/ELFA Front and rear/products require 2 pieces., KAWASAKI ZRX1200DAEG 15 [Year]09/10/11/12/13/14/15/16 [Model]ZR1200D9F/D9FA/DAF/DBF/DCF/DCFA/DDF/DDFA/DEF/DEF/DEFA/DFF/DFFA/DGF/DGFA/DGFA/DGFB Front and rear/2 pieces of product are required., KAWASAKI Ninja 250 18 [Year]13/14/15/16/17 ABS [Model]EX250, KAWASAKI Z900RS 18-21 [Model]ZR900CJF/CJFA/CKF/CKFB/CLF/CLFB Front/Rear/Product requires 2 pcs.
May 9, 2021
It's plastic, so it looks cheap.
If you are looking for a quality product, the recommendation is to use another manufacturer's Gold.
Helpful?
Fits:KAWASAKI Z1000 19-21 [Year]10/11/12/13 [Model]ZR1000DAF/DBF/DCF/DDF/DDFA Rear Side Only 1 product is required., KAWASAKI Z900RSCAFE 16 [Year]18/19/20 [Model]ZR900EJF/EKF/ELF/ELFA Front and rear/products require 2 pieces., KAWASAKI ZRX1200DAEG 15 [Year]09/10/11/12/13/14/15/16 [Model]ZR1200D9F/D9FA/DAF/DBF/DCF/DCFA/DDF/DDFA/DEF/DEF/DEFA/DFF/DFFA/DGF/DGFA/DGFA/DGFB Front and rear/2 pieces of product are required., KAWASAKI Ninja 250 18 [Year]13/14/15/16/17 ABS [Model]EX250, KAWASAKI Z900RS 18-21 [Model]ZR900CJF/CJFA/CKF/CKFB/CLF/CLFB Front/Rear/Product requires 2 pcs.
Aug 8, 2020
Used to install a blinker from outside the company.
I used it to replace my Z900 Blinker with an Other Brand Product.
The M8Size is perfect as indicated by the M8 standard.
Thanks to this, I was able to install the external Blinker without any problems.
Helpful?
New Custom Articles
