[ROTOBOX RBX2탄소 섬유 휠]
어워드도 취득한 ROTOBOX RBX2는 최고 수준의 퍼포먼스, 쾌적성, 안전성을 만족하도록 설계된 초경량 탄소 섬유 바퀴입니다.
업계 첫 3성분 복합재 (카본 에폭시 스테인리스) 그 자체의 일체형 중공 카본캐스트 구조인 이 휠을 장착하면 모든 스포츠 바이크에 극적인 업그레이드를 기대할 수 있습니다.
'전 세계 많은 전문가 심사위원들과 경주자들, 퍼포먼스 지향의 모터사이클리스트들에게 이것이 최초의 선택이라는 것도 이상할 일은 아닙니다'
바퀴의 무게는 오토바이의 운동 성능에 크게 관여합니다
ROTOBOX 탄소 휠 RBX2는 가볍고 강인한 탄소 섬유 휠
순정 장착 휠보다 약 40%경량. (차량에 따라 다릅니다..)
강성 밸런스도 재검토되어 핸들링, 브레이킹, 가속 어느 것 하나 최고의 퍼포먼스를 발휘합니다.
BMW S1000RR의 경우 안팎으로
・순정:11.7kg
· ROTOBOX : 6 . 69kg (42.8%경량)
DRIVEN제 스프로킷 옵션 설정. (블랙, 레드, 블루, 골드)
520사이즈 → 39-51T
525사이즈 → 39-51T
530사이즈 → 39-49T
[그로스, 매트, 고를 수 있는 피니시]
피니시의 클리어 도장은 광택 (그로스) 아니면 옵션으로 무광 (매트) 선택이 가능함.
둘 다 상처, 파인 부분, 자외선으로부터 최고 수준의 보호를 보장합니다.
광택 마무리는 카본 무늬가 분명히 잘, 매트 마무리는 차분한 자연스러운 외모에 됩니다.
[카본 파이버 열풍]
경량, 고강성, 뛰어난 강도, 그리고 사람들의 이목을 끄는 디자인은 오토바이 업계에서 카본파이버 사용이 계속 증가하고 있는 명백한 이유입니다.
카본 파이버 휠은 오토바이의 총 성능이다 (핸들링, 브레이킹에서 가속까지) 을 대폭 향상시키기 위한 가장 중요한 요소 중 하나입니다
업계 첫 3성분 복합재 (카본 에폭시 스테인리스) 그 독자적인 일체형 중공 카본캐스트 구조에 의해, ROTOBOX는 업계 전체의 품질과 제조 기준을 재정의하고 있습니다.
탄소 섬유 휠 혁신의 최전방에 놓겠습니다.
[레이스 트랙에 인스파이어된 디자인]
ROTOBOX 휠의 외관은 일반적인 설계 가이드라인에 타협하지 않고, 가능한 한 최고의 퍼포먼스와 안전성을 실현한다는 철학에 의해 결정됩니다.
카본 파이버 컴퍼짓의 장점을 최대한 살리고 기존의 모든 단점을 줄이기 위해 전문 테스트 팀인 YART (야마하 오스트리아 레이싱팀) 경험과 전문지식을 휠 설계에 접목하였습니다.
결과는 스포크이며, 실질적으로 넓은 영역에서 림에 적합합니다.
[자외선 보호 코팅]
특수 자외선 보호 클리어 코팅은 매우 얇으면서도 방사선으로부터 탄소 휠을 보호해.
명확하고 매끄러운 림 표면을 실현.
[고품질 센터부 부품]
각 모델에 맞춘 허브는 항공업계에서 사용되는 고품질의 7075T6 알루미늄 합금에서 CNC 가공으로 제작, 카본림에 항구적으로 조립되어 있습니다.
ROTOBOX 휠은 각 모터사이클 모델 전용으로 설계되어 있으며 OEM 휠에서 볼트온으로 교환할 수 있습니다.
쿠션 드라이브, 스프로킷 캐리어, 스페이서, 베어링은 스틸이나 옵션으로 세라믹도 선택할 수 있습니다.
*스프로켓은 전용품이 필요합니다.
[알루마이트 된 90도 밸브 스템]
고품질 90도 밸브스템이 초고속 영역에서도 적절한 에어압을 유지합니다.
[뱅터홀]
제품의 장기적인 품질을 확보하기 위하여, 결로를 막는 벤트홀이 휠스포크 바닥에 설치되어 있습니다.
[로테이션 에어로 다이내믹스의 개선]
오토바이를 세기 위해서는 휠을 더 경량화하는 것 외에도 에어로 다이내믹스를 더 이상 개선하는 것도 중요합니다
회전 중의 공기력 계수를 낮추기 위해 타원형으로 스포크의 단면이 만들어졌습니다
[토크에 견디기 위한 리브]
각 스포크에 리브를 배치한 설계로 토크에 견딜 수 있는 기능적인 휠이 되었습니다.
[세 가지 복합 재료]
카본, 에폭시, 스테인리스를 조합한 ROTOBOX만의 3성분 복합재료를 사용하여 제조되고 있습니다.
2.5mm의 스테인리스 강선은 림의 각 측면에 내장되어 있어 가장 중요한 바깥쪽 내충격성을 향상시켰습니다.
[구조 리브]
원피스 중공 카본캐스트
ROTOBOX는, 카본, 에폭시, 스테인리스를 조합한 독특한 3 성분 복합 재료를 개발·사용하는 세계 최초, 그리고 현재도 유일한 카본 파이버 휠 메이커입니다.
복합재도 물론이지만, 원피스의 중공 카본캐스트 제조 과정도 참신합니다.
여러 다른 타입의 CNC 테일러드 카본 원단을 수작업으로 성형금형으로 배치합니다.
내충격성을 높이기 위해 림 양쪽에 스테인리스제 2.5mm 강선이 추가되어 있습니다.
액체 에폭시 수지가 매우 높은 압력 아래서 밀봉된 후 다시 구워진 도구에 주입됩니다.
일체형 중공 카본캐스트를 제조하는 이 과정은 특별한 고압 레진트랜스퍼 몰딩 (RTM) 기술을 응용한 것입니다.
생산 프로세스의 계속적인 품질, 안전성, 정밀도를 확보합니다.
[안전 제일]
휠은 JWL dotE 인증 안전 규격 JASOT 203-85에 준거합니다.
[테스트랩]
안전이 최우선사항이므로, ROTOBOX 테스트랩을 설치하여, 제품의 품질을 항상 체크 및 개선하고 있습니다.
[래디얼 패틱 테스트]
이 테스트의 목적은 림과 허브의 내구성을 확인하는 것입니다
이 목적을 위해 드럼은 바퀴를 80km/h의 일정한 속도로 회전시키면서 수직 하중을 가합니다 (프런트: 340kg/리어: 560kg 최저 500.000사이클).
[토션 패틱 테스트]
이 테스트의 목적은 스포크와 허브의 내구성을 확인하는 것입니다
따라서 휠은 지지대로 고정되며 허브 접촉면에는 비틀림 모우먼트 (프런트: 442Nm/리어: 790Nm, 최저 100.000사이클) 을 더합니다.
[코닝 패틱 테스트]
이 테스트의 목적은 림과 허브의 내구성을 확인하는 것입니다
이 목적을 위해 휠은 회전 디스크에 고정되어 있고 일정한 속도로 회전하면서 휠의 중심으로 구부러진 모멘트 (프런트: 217Nm/리어: 387Nm, 최저 100.000사이클) 을 더합니다.
[임팩트 테스트]
그 테스트의 목적은 타이어의 공기 유지와 림, 스포크, 허브의 강도를 확인하는 것입니다.
중량 (프론트:225kg/리어:375kg) 위쪽 스트라이커를 150mm 높이에서 바퀴에 떨어뜨리고 하중을 가하세요.
[ROTOBOX RBX2Carbon fiver wheel]
The award-winning ROTOBOX RBX2 is an ultra-lightweight carbon fiver wheel designed to meet the highest levels of performance, comfort and safety..
With the industry's first tri-component composite (Carbon - Epoxy - Stainless Steel) and its unique one-piece hollow CarbonCasting construction, this wheel will be a dramatic upgrade for all sports type motorcycles..
It's no wonder that this is the first choice for many expert judges, racers and performance-oriented motorcyclists around the world!.
The weight of the wheel is heavily involved in the performance of the motorcycle..
The ROTOBOX Carbon wheel RBX2 is a lightweight and strong Carbon Fibre wheel..
Approximately 40% lighter than the OEM installed Wheel. (Varies by vehicle.. )
The stiffness balance has been revised to give you the best performance in handling, breaking and acceleration..
In the case of the BMW S1000RR, front and rear
・OEM:11.7kg
ROTOBOX:6.69kg (42.8% lighter)
Option settings for DRIVEN's Sprocket. (Black,Red,Blue,Gold)
520Size→ 39-51T
525 Size→ 39-51T
530 Size→ 39-49T
[Gloss and Matte, choice of Finish]
Finish [Color] Clear paint can be selected Gloss or Matte by Option..
Both products guarantee the highest level of protection against scratches, dents and UV rays..
GlossFinish gives a clear carbon pattern and Mat finish gives a calm and natural look..
[Carbon Fibre fever]
Light weight, high stiffness, superior strength and eye-catching design are just a few of the reasons why the use of Carbon Fibre in the motorcycle industry continues to grow..
The Carbon fiver wheel is one of the most important elements to improve the overall performance of a motorcycle (from handling and breaking to acceleration) by a large margin..
With the industry's first tri-component composite (Carbon - Epoxy - Stainless Steel) and its unique one-piece hollow CarbonCasting construction, ROTOBOX is redefining quality and manufacturing standards throughout the industry..
Carbon fiver wheel puts you at the forefront of innovation.
[Design Inspired by RaceTruck]
The appearance of the ROTOBOXWheel is determined by the philosophy of achieving the highest possible performance and safety without compromising the general design guidelines..
The experience and expertise of PRO's testTeamYART (YamahaAustriaRACINGTeam) has been incorporated into the wheel design to maximise the benefits of Carbon Fibre Composite and reduce any known disadvantages..
The result is Spoke, which is compatible with Rim in a substantially wider range..
[UV Protection Coating]
Special UV-protective Clear-coating protects the Carbon wheel from radiation despite being very thin.
Provides a clear and smooth rim surface.
[High Quality Center SectionParts]
The hubs for each model are CNC machined from high quality 7075 T6 aluminum alloy gold used in the aviation industry and are permanently assembled on CarbonRim..
ROTOBOXWheels are designed specifically for each motorcycle model and can be replaced with Bolt On from the OEM wheels..
CushionDrive, Sprocket carrier, Spacer and Bearing are included, and Bearing is Steel or Ceramic can be selected by Option..
*Sprocket requires a special product.
[Anodized 90-degreesValve Stem]
High quality90-degreesValve Stem maintains proper air pressure even at very high speeds..
[Bent Hall]
To ensure the long-term quality of the product, a vent hole is located at the bottom of the wheel spoke to prevent condensation..
[Rotational Aerodynamics Improvements]
To improve the performance of the motorcycle, it is important to reduce the weight of the wheel and also to improve the aerodynamics..
The cross section of the Spoke is elliptical to reduce the aerodynamic coefficient during rotation..
[Rib to withstand Torque]
Ribs are placed at each Spoke to create a functional wheel that can withstand Torque..
[three types of composite materials]
Manufactured using ROTOBOX's proprietary three-component composite material that combines Carbon, Epoxy and Stainless Steel.
2.5mm Stainless Steel wire is integrated into each side of the Rim for increased impact resistance in the most critical outer areas..
[Structural Rib]
One piece Hollow CarbonCasting
ROTOBOX is the first and still the only carbon fiver wheel manufacturer in the world to develop and use a unique three-component composite material combining Carbon, Epoxy and Stainless Steel..
Of course, the composite material, but the one piece hollow CarbonCasting manufacturing PROcess is also novel!.
Several different types of CNC-tailored carbon fabric are placed into the molded gold mold by hand..
To increase the impact resistance, 2.5mm steel wire of Material:Stainless Steel has been added to the Both Sides of the Rim..
Liquid Epoxy resin is then injected into the sealed and tempered tool under very high pressure..
This PROcess, which produces a one-piece hollow CarbonCasting, is based on the application of the special high-pressure ResinTransfer Moulding (RTM) technology..
Ensures continuous quality, safety and accuracy of production PROces.
[Safety first]
Wheel complies with JWL dotE approved safety standard JASO T203-85.
[test lab]
As safety is our top priority, we have set up a ROTOBOXtest laboratory to constantly check and improve the quality of our products..
[Radial phatic test]
The purpose of this test is to check the durability of Rim and hub..
For this purpose, the Drum applies a vertical load while rotating the Wheel at a constant speed of 80km/h (Front:340kg/Rear:560kg minimum 500.000Cycle)..
[Torsion phatic test]
The purpose of this test is to check the durability of the Spoke and the hub..
For this reason, the Wheel is fixed to the Support and the contact surface of the hub is subjected to a torsional Moment (Front:442Nm/Rear:790Nm, minimum 100.000Cycle)..
[Corning phatic test]
The purpose of this test is to check the durability of Rim and hub..
For this purpose, the Wheel is fixed to the rotating disc and applies a bending Moment (Front:217Nm/Rear:387Nm, minimum 100.000Cycle) to the center of the Wheel while rotating at a constant speed..
[Impacttest]
The purpose of this test is to check the air retention of the tire and the strength of the Rim, Spoke and hub..
Striker with weight (Front:225kg/Rear:375kg) is dropped from 150mm height to the Wheel and impact load is applied..