순정 키 실린더를 푸시 타입의 킬 스위치로 변환할 수 있는 키트입니다.
이모빌라이저 전용 안테나가 내장된 부품이 부속되어 있기 때문에 차체가 보이지 않는 위치에 장착할 필요가 있습니다.
약 350g까지 경량화가 가능하고, 핸들 록을 제거, 사양을 경주용 오토바이에 접근할 수 있습니다.
차종 전용 볼트온 설계를 위해 특별한 배선 가공이나 세팅이 필요하지 않습니다.
빌릿 이 갈 7075 (고강도 알루미늄 합금) 하드 알루마이트 처리 가공하였습니다.
IP69K규격을 취득하기 때문에 먼지와 작은 쓰레기의 침입을 막기, 물이나 기름에도 매우 강한 내성이 있습니다.
튜브에는 Reichem 105를 사용하고 있습니다.
This is a kit to convert a stock key cylinder into a push type kill switch.
A part with an integrated immobilizer-only antenna is included.
The weight can be reduced to about 350g and the handlebar lock can be removed to bring the specification closer to a racing bike.
Hard anodized high-strength aluminum alloy.
It prevents dust and small particles from penetrating and is highly resistant to water and oil.
No special wiring or setting is required due to its bolt-on design.