노멀보다 약 10mm앞으로 하기로 쾌적한 위치에 차종 전용 설계
노멀 핸들 형상을 베이스로, 그립 부분이 평행 이동한 디자인.
각도는 정상과 동등하므로, 이미지를 해치지 않고, 양질의 라이딩 포지션을 형성할 수 있습니다.
■ 케이블류 교환 불요
차종 전용 설계하므로, 달아 보지 않으면 모르라고 하는 불안은 없습니다.
*차종에 따라서는, 최소한의 케이블류 잘 다루다 변경 등이 필요한 경우가 있습니다.
*별도 케이블류의 교환이 필요한 경우가 있습니다.
■ 스위치 구멍 가공 후
위치 결정이나 공구 준비 등, 번거로운 작업이나 쓸데없는 지출은 이제 필요 없습니다.
*차종에 따라서는, 스위치 구멍이 없는 경우가 있습니다.
■기 홀더를 좌우로 비키어 놓다
취부 직선을 약 5mm 길게 설계.
레버의 손잡이 위치를 미조정할 수 있습니다.
Specially designed for models with a comfortable position by moving it forward about 10mm compared to the normal position.
The design is based on the stock handlebar shape, but the grip part has been shifted in parallel.
The angle is the same as the stock one, so you can form a good riding position without damaging the image.
■No need to replace cables
It is designed for exclusive use of the model, so you don't have to worry about compatibility.
■Switch hole pre-machined
You no longer need to worry about positioning and preparing tools, and you no longer need to spend extra money.
■Shift the lever holder to the left or right
The mounting straight line is designed to be about 5mm longer.
The grip position of the lever can be fine-tuned.