[세트 내용]
멍키 게 브렝보 프론트 캘리퍼 지원:1개
스페이서 A유형/두께 14mm (미터기어와 왼쪽 포크 사이) :1개
스페이서 B유형/두께 11mm (허브와 캘리퍼 서포트 사이) :1개
스페이서C타입/두께8mm (캘리퍼 서포트와 오른쪽 포크 사이) :1개
생산국:일본산
*10인치는 휠 크기 4.0J까지 대응할 수 있습니다.
*4.0J는 포크와 림 클리어런스가 1.5mm정도입니다.
*제품 개체 차에 의한 시판의 스테인리스제 M12평 와셔 0.5mm를 1장 넣어야 합니다.
*부속의 스페이서는 미니 모토사제 제품 ID4009디스크용 허브 전용 설계입니다. 타사 제품 허브 등의 경우에는 별도 스페이서를 준비 주세요.
*순정 사양의 더스트 씰에서 미니 모토 사제의 4L몽키 사양의 자바라 부츠 (알루미늄제 어댑터 세트) 세트로 교환해 주세요.
*본 제품의 사용은 좌우 포크를 교체하여 사용하십시오.
*8인치 휠은 장착 불가합니다.
*프라우드 호스와 레버류, 피팅류는 별도 필요합니다. 또 캘리퍼 부착 볼트 M8X20:2개가 별도 필요합니다.
*별도 구매가 필요한 부품
제품 ID4009:원숭이 디스크용 프론트 허브 NSR로터용
제품 ID4995:브렝보 캘리퍼 P2:34:84mm골드 새 게
*화상에는 다른 색깔이 포함됩니다.
[Set components]
Monkey crab Brembo front caliper support: 1pc
Spacer A type / thickness 14mm (between meter gear and left fork): 1pc
Spacer B type / thickness 11mm (between hub and caliper support): 1pc
Spacer C type / thickness 8mm (between caliper support and right fork): 1pc
Produce country: Made in Japan
*10 inches wheels can accommodate up to wheel size 4.0J.
*4.0J has about 1.5mm fork to rim clearance.
*A commercially available stainless steel M12 flat washer 0.5 mm must be inserted due to individual product differences.
*The included spacers are designed specifically for hubs for the ID4009 disc, a product manufactured by Minimoto.For hubs made by other manufacturers, please prepare spacers separately.
*Replace the dust seal of the OEM specification with a set of bellows boots (aluminum adapter set) of 4L Monkey specification made by Minimoto.
*Please replace the left and right forks when using this product.
*8 inches wheels cannot be installed.
*Fluid hoses, levers, and fittings are required separately.Also, caliper mounting bolts M8 x 20: Two are required separately.
*Parts that must be purchased separately
・Product ID 4009: Front Hub NSR Rotor for MONKEY Disc
・Product ID 4995: Brembo calipers P2: 34: 84mm New Gold Caliper
*The image may contain other colors.