드라이버 소재의 제트 헬멧에 그래픽 모델 등장.
■드라이파이버シェル
드라이버 셸은 프레스 시에 높은 압력을 균등하게 가하여 여분의 수지를 셸에 남기지 않고 두께를 안정시킴으로써 내충격성과 분산성을 향상시켜 안전성을 해치지 않고 경량화한 셸입니다.
압력이 균등한 경우
쓸데없는 수지가 남지 않고 경량
셸 전체로 충격을 분산하여 손상을 경감.
유연성이 높고 깨지기 어렵다.
압력이 균등하지 않은 경우
두께가 들쭉날쭉하다
충격이 얇은 부분에 축적되어 깨지는 원인이 된다.
■별매 '페이스가드' 장착하여 와이드 뷰 풀페이스로 변환
별도 판매되는 페이스가드를 장착하면 G-FORCE SSJET이 와이드 뷰 풀 페이스가 됩니다!
원터치로 간단히 장착 가능!
페이스가드에는틴커튼도부속됨.
아래로부터의 바람이 들어오는 것을 방지합니다.
■ 아에로 포름
G-FORCE SS 시리즈는 에어로 형상으로 설계되어 주행중의 공기의 흐름을 매끄럽게 하여 바람에 의한 압입이나 들뜸을 줄입니다.
■대형 벤틸레이션
대형 벤틸레이션과 함께 공기를 많이 도입해서 헬멧의 편안함을 높여줍니다.
벤치레이션의 개폐는 2단계 조정이 가능하며, 오픈, 하프 오픈, 클로즈를 조정할 수 있습니다.
◆헬멧 내부에 바람 뚫어 헬멧 내부도 쾌적하게
내장에는 내부 EPS에 에어 레일이 새겨지고 있으며, 벤틸레이션부터 도입된 공기를 효율적으로 헬멧 전체에 흘리는 것에서 쾌적성을 향상시켰습니다.
■도시 투어링에서 맹활약! 더블바이저
선글라스 같은 선글라스 같은 측면의 레버를 슬라이드하기만 하면 재빨리 이너바이저를 켜서 햇볕이 강할 때 갑작스런 역광으로도 효과를 볼 수 있습니다
■ 어저스터블 블 블러셔 패드
커스터마이즈 가능한 내장 스펀지
블러셔 패드의 스폰지를 분리하여 커스터마이즈할 수 있습니다.
■ 다 씻을 수 있는 내장 패드!
모든 내장 패드는 세척이 가능하므로 언제나 청결하게 사용할 수 있습니다 슈퍼 쿨니스 핏 그래서 여름에도 편안하게 사용할 수 있습니다.
■ M-Slim 사이즈 탄생!
M 사이즈의 센터 패드와 S 사이즈의 치크 패드가 세트로 된 M-Slim 사이즈가 새롭게 등장!
또, 이 치수에는 내장 조정용 스폰지가 부속되어 있습니다.
■ FOGWIN 교환 서비스
A-FORCERSJET에는, 'FOGWIN 교환 엽서' 이 부속.
헬멧 구입 후 엽서를 송부하면 대응되는 FOGWIN (F-03) 을 우편으로 보내 드리겠습니다.
■ 실드 듀얼 액션 클로징. 높은 기밀성
지포시스 시리즈의 실드 기어에 사용된 듀얼 액션 클로징은 5단계로 쉴드를 개폐합니다.
쉴드의 개폐 타이밍에 따라 실드 베이스 자체가 가동되어 쉴드를 앞으로 당긴 다음, 마지막 다섯 번째 기어로 완전히 밀폐합니다.
보호막을 헬멧 측 와이퍼 몰에 끌어당겨 초밀폐 실현.
실드와 와이퍼 몰 사이로 비 등의 침입도 방지합니다.
■ 안경, 선글라스툴로 인한 압박 경감!
안경 착용하시는 분, 애용 선글라스를 병용하고 싶은 분을 위해서
치크 패드상 엔드 안경의 두루미가 닿는 부분을 스펀지 모양으로 공간에 여유를 갖게 하는 것으로, 안경의 두루미의 압박을 경감했습니다.
Graphic model jet helmet made of dry fiber material.
■Dry Fiber Shell
The dry fiber shell is a lightweight shell with improved impact resistance and dispersibility by applying high pressure evenly during pressing to stabilize the thickness without leaving excess resin in the shell and without compromising safety.
・When the pressure is even
No resin left keeping its lightness.
The whole shell disperses the impact and reduces the damage.
Flexible and crack resistant.
・If the pressure is not even
The thickness will vary.
The impact accumulates in the thin part and causes it to crack.
■Attach "Face Guard" (sold separately) to convert to a wide-view full-face
If you install the optional face guard, G-FORCE SS JET becomes a wide-view full face!
And it's easy to install with one-touch!
The faceguard also includes a chin curtain.
Prevents wind from blowing in from below.
■Aeroform
G-FORCE SS series is designed aerodynamically to smooth the air flow while riding and reduce the push and lift by wind.
■Large ventilation ■
It is equipped with large ventilation to let more air in and improve comfort inside the helmet.
The ventilation can be opened, half-opened, or closed in two adjustable positions.
■The inside of a helmet is also comfortable by adding a passage of wind to a helmet
Air rails are engraved in the interior EPS to improve comfort by efficiently distributing air taken in from ventilation to the whole helmet.
■It is very useful in urban riding and touring!double-visor
Just slide the lever on the side to quickly insert and remove the inner visor.You can get the effect of sunglasses in strong sunlight or sudden backlight.
■Adjustable cheek pads
Customizable interior sponge.
The cheek pad sponge can be removed for customization.
■All washable interior pads!
All the interior pads are washable, so you can use it cleanly anytime.The interior pad is made of the cool material "Super Coolness Fit", so you can use it comfortably even in summer.
■M-Slim size was born!
The M-Slim size, which includes the M size center pad and the S size cheek pad, is available!
This size also comes with a sponge for interior adjustment.
■Shield dual-action closing.High sealability
The dual action closing system adopted for the shield gear of G-FORCE SS series opens and closes the shield in 5 stages.
The shield base itself moves according to the timing of opening and closing the shield to pull the shield toward you, and the final 5th gear seals the shield completely.
Shield is pulled to the wiper molding of the helmet side to realize super tight seal.
It prevents rain from entering through the gap between shield and wiper molding.
■Reduces pressure from the temples of glasses and sunglasses!
For those who wear glasses or want to use their favorite sunglasses.
The upper end of the cheek pad where the crane of the glasses touches is shaped like a sponge to provide more space and reduce the pressure caused by the crane of the glasses.