[재료]
·외주:스테인리스 420
· 내주었다:알루미늄
[빅 디스크 로터] 200mm
[맞춤 캘리퍼]
각 차종 노멀 캘리퍼나 Z/ZR 등 3YK에 장착하고 있는 브렌보우
통칭 야만보 : KN기획2POT (DK02/DK05시리즈)
*그랜드 액시스 100은 (5FA1의 초기형) 만 (5FA2-이후는 4홀이므로 불가합니다).)
리모컨 JOGZR에의 장착은 KN기획사 프론트 포크+KN기획2 POT캐리퍼가 필요합니다.
조합하는 캘리퍼나 프론트포크의 개체차이에 의해 캘리퍼센터등이 미묘하게 어긋나는 경우가 있습니다. 심와셔등으로 조정을 실시해 주세요.
*볼트가 부속되어 있지 않으므로, 별도 볼트 4개가 필요합니다.
통칭 야맘보 캘리퍼나 순정 캘리퍼에 200mm의 구경 디스크 로터를 조합하면 브레이크 패드의 안쪽, 혹은 바깥쪽을 깎아 브레이크 패드의 끝면을 깎는 등의 가공이 필요하게 되는 경우가 있습니다.
설계가 빠듯하기 때문에, 조합하는 디스크로터나 캘리퍼, 포크의 개체차이에 의해, 디스크로터의 바깥둘레 부분과 캘리퍼의 안쪽 부분이 간섭하는 경우가 있습니다.
간섭이 발생했을 경우는, 간섭부분을 깎는 등의 가공이 필요하므로, 잘 검토후 구입가능하도록 부탁드립니다.
간섭은 차체의 개체차에서 발생합니다. 제품불량이 아닙니다. 미리 양해바랍니다.
*메이커의 사정에 의해 상품의 사양변경이 있을 수 있습니다. 양해바랍니다.
[Material]
・Circumference: Stainless steel 420
・Inner circumference: Aluminum
[Big disc rotor] 200mm
[Compatible caliper]
・Brembo installed in 3YK such as stock caliper and Z / ZR of each model.
・A.K.A. Yamambo: KN Planning 2POT (DK02 / DK05 series)
*GRAND AXIS 100 is (early model of 5FA1) only (5FA2- and later models are not available due to 4 holes.)
*Installation of the remote control JOGZR requires KN Planning front fork and KN Planning 2POT caliper.
*Depending on the individual differences of the caliper and front fork, the caliper center may be slightly off.Adjust with a shim washer.
*Bolts are not included, so 4 bolts are required separately.
*If you use a 200mm disc rotor with a Yamambo caliper or stock caliper, you may need to shave the inside or outside of the brake pad, or shave the contact surface of the brake pad.
*Due to the limited design, the outer part of the disc rotor and the inner part of the caliper may interfere with each other depending on the individual differences of the disc rotor, caliper and fork.
*If interference occurs, it will be necessary to process the product by shaving the interference part.
*Interference may occur due to individual differences in the vehicle body.This is not a product defect.
*There may be changes in product specifications due to the manufacturer's reasons.