Z1 등의 포크로 4홀 캐스트 휠에 320mm 로터의 CP2696용 캘리퍼 지원입니다.
장착 볼트는 M10-P1.25를 채용하고 장점은 펴지기 어렵다 (지원과 볼트의 나사산의 접촉 면적이 커지므로) 파단에 강한 (피치가 작을수록 나사산의 깊이가 얕아지기 때문에) 볼트의 심재로 남는 면적이 커지기 때문에 인장 강도, 파단, 파손에 강해집니다.
부속된 볼트는 방청을 위해서 여섯 각혈부 크로 몰리 볼트를 와이어링 구멍 가공 후에 다시 도금 처리했습니다.
스피드샵 이토를 고집하는 캘리퍼와 서포트에 일체감을 가지게 한 지금까지 없는 디자인입니다.
This is a caliper support for CP2696 with 4 hole cast wheel and 320mm rotor on Z1 fork.
The merit of using M10-P1.25 mounting bolts is that they are difficult to loosen (because the contact area between the support and the bolt threads is larger), they are resistant to breakage (because the finer the pitch, the shallower the depth of the threads), and the area remaining as the core material of the bolt is larger, so they are stronger against tension, breakage, and breakage.
The included bolts are hexagon socket head chromoly bolts that have been re-plated with wire ring holes to prevent rust.
The caliper and the support are designed by Speed Shop Ito to be one and the same, which has never been seen before.