[칼라] 블랙 하드 알루마이트
[소재] 듀랄루민
[사양]
·4포지션
·역 시프트:X
포지션
(1) 00mmBACK/10mmUP
(2) 00mmBACK/20mmUP
(3) 10mmBACK/10mmUP
(4) 10mmBACK/20mmUP
[대응 정보]
순정 브레이크 호스
순정 브레이크 스위치
·ABS차
*장착 주의사항*
브레이크측 페달의 조정위치 또는 차량의 개체차이에 의해 정품 히트가드에 간섭하는 경우가 있으므로 간섭하지 않는 위치에서 조정해 주십시오. 또는 히트가드 분리하여 대응해 주십시오.
-체인지 측:
조정범위를 페달 선단부하 방향으로의 경우, 위치에 의해 사이드 스탠드와 간섭하는 경우가 있으므로 간섭하지 않는 위치에서 조정해 주세요.
14-18Z1000은, (3) 10mmBK/10mm UP 포지션의 경우 차량의 개체차이로 인해 정품 열도가드 비대응.
*장착 이미지는 Ninja1000SX (20) 됩니다.
*메이커의 사정에 의해 상품의 사양변경이 있을 수 있습니다. 양해바랍니다.
[Color] Black hard anodized
[Material] Duralumin
[Specification]
・Four positions
・Reverse shift: Not available
・Position
(1)00mmBACK/10mmUP
(2)00mmBACK/20mmUP
(3)10mmBACK/10mmUP
(4)10mmBACK/20mmUP
[Compatible information]
・Stock brake hose
・Stock brake switch
・ABS vehicles
*Installation notes*
・Brake side: The pedal may interfere with the stock heat guard depending on the adjustment position of the pedal or the individual difference of the vehicle, so please adjust the position without interfering or remove the heat guard.
・Change side:
・If the adjustment range is toward the bottom of the pedal tip, it may interfere with the side stand depending on the position.
・For '14-'18 Z1000, (3) 10mm BACK / 10mm UP position is not compatible with the stock heat guard due to individual differences of the vehicle.
*Installed on Ninja 1000SX (20).
*There may be changes in product specifications due to the manufacturer's reasons.