지금 저 다운은 스쿠터 커스텀의 기본이라고 되어 있으나, 그 저온형에 맞추어 최대한 차체 전체를 낮게 보이기 위해서, 차체와의 일체감을 추구한 탠덤 바를 개발했습니다!
차체에 맞게 낮은 디자인되어 있으므로 몸매에 밀착하며 가장 굵은 32mm지름의 스테인리스 파이프를 채용했으므로, 존재감, 눈에 띄도는 뛰어납니다!
마무리는 바흐리 걸기를 베풀어 있기 때문에, 고급감 탑리에서 드레스 업에는 최적의 일품입니다!
바가 가장 굵은 것이므로, 패신 저가 쥐기 쉽게 힘을 넣기 쉬우므로, 안전성도 높아지고 있습니다.
유저님에 의한 편리하고 깔끔하게 장착하고 받기 위해서 대형 백레스트를 우일즈윈오리지날에서 제작하였습니다.
종전 가격보다 큰 폭으로 인하하게 성공한 것이며, 더 찾기 쉽게 되었습니다.
오리지널 백레스트는 형으로부터 일으키고 제작하고 있기 때문에, 보기에도 좋은 내구성이 뛰어나 탄탄한 조성이 되고 있습니다.
라지 사이즈와 작은 크기의 2사이즈를 준비하고 있기 때문에, 기호에 맞게 선택하시겠습니까.
재질은 내구성, 내 부식성이 높은 SUS304스테인리스제입니다.
마무리는 바흐리 걸기를 베풀어 있기 때문에, 고급감 탑리에서 드레스 업에도 좋은 일품입니다!
또, 탠덤 바를 끌어내기 위해서 일부 바디 패널을 떼어 낼 필요가 있지만, 푼 후의 눈가림용 플레이트 (스테인리스제 경면 마감) 가 부속되어 있으므로, 위화감 없이 받게 되어 있습니다.
바 앤드의 형상을 기호에 따라서 고상형과 브라이언트 타입의 2타입에서 선택하여 주시겠습니까.
바의 굵기는 32mm지름과 38mm지름의 2종류에서 선택하여 주시겠습니까.
WirusWin developed a pillion bar that is designed to match the low form of the scooter and to make the whole body look as low as possible
The stainless steel pipe is designed to be low along the vehicle body so that it fits the body line, and the stainless steel pipe of 32mm diameter is adopted so that the presence and the prominence are outstanding!
The finish is buffed, so it has a high quality feel and is a great product for dressing up!
The bar is very thick, so the passanger can grip and apply pressure which makes it safer.
In order to make it more convenient and easier for users to install, a large backrest was made by WirusWin.
WirusWin has succeeded in reducing the price significantly from the previous price, so it is now more affordable!
The original backrest is made from the mold, so the price is reduced and it looks good and is durable and solid.
There are two sizes available, large and small, so you can choose the one that suits you best.
The material is SUS304 stainless steel with high durability and corrosion resistance.
The finish is buffed, so it has a high quality feel and is a great product for dressing up!
In order to install the pillion bar, it is necessary to remove some of the body panels, but a stainless steel mirror-finished plate is included to hide the body panels after removal, so that the pillion bar can be installed without any discomfort.
You can choose from two types of bar end shapes, Bryant type and Elegant type, according to your preference.
The bar is available in two thicknesses, 32mm and 38mm.