[치수]
블리저 장착 외경: 10mm
· 삽입부분 : M20-P2.5
[부속품] O링
* 정품 필러 캡에 오일 레벨 게이지가 붙어 있는 차량은 본 상품으로 교환하면 게이지가 없어집니다.
*상기차량이라도 M20-P2.5가 아니면 장착이 불가합니다. 구입전에 확인하시기 바랍니다.
* 부속 O링을 사용시, 꼭 닫지 않고 어태치먼트가 뜨는 경우는, 정품 O링을 사용해 주세요.
* 차량의 개체차이로 정품 O링을 사용해도 약간 어태치먼트가 뜨는 경우가 있습니다.
* 블리저 호스는 반드시 별도 판매되는 품번:02B00, 또는 품번:KS-RHUN을 달아주세요.
* 호스 끝은 반드시 오일 캐치 탱크 등에 연결하십시오.
*이미지에는 다른 색상과 상품이 포함되어 있다.
* KN기획 Uma Racing은 일본총대리점입니다. 병행수입상품과 KN기획의 정품은 내용 또는 사양이 다르므로 주의해 주십시오.
*메이커의 사정에 의해 상품의 사양변경이 있을 수 있습니다. 양해바랍니다.
[Size]
・Mounting outer diameter of breather: 10mm
・InsertionM20-P2.5
[Components] O-ring
*If your vehicle has an oil level gauge attached to the stock filler cap, replacing it with this product will eliminate the gauge.
*If your vehicle is not listed above or not M20-P1.5, it cannot be installed.Please check before you buy.
*When using the supplied O-ring, if it is not fully tightened and the attachment floats, please use the stock O-ring.
*Depending on the individual differences of the vehicle, the attachment may float slightly even if the stock O-ring is used.
*Breather hose must be sold separately, part number: 02B00, or part number: Please attach KS-RHUN.
*Be sure to connect the end of the hose to an oil catch tank or the like.
*The image may contain other colors and products.
*KN Planning's UmaRacing is the exclusive distributor in Japan.Please note that the contents or specifications of the parallel imported products and the official products of KN Planning are different.
*There may be changes in product specifications due to the manufacturer's reasons.