Z1/Z2/KZ1000계로 다리걸음에 어려움을 겪고 있는 사람의 필수품입니다.
시트 가죽은 슬림 & 슬림 시트 스폰지 성형용으로 재단하여 불필요하거나 시트 모양이 아래로 어긋나지 않습니다.
걸터앉아 보면 노멀보다 훨씬 폭이 좁아진 것을 알 수 있습니다. 발걸음이 불안하면 오토바이를 타는 것이 불안해지죠?
그런일들도 해소하고 Z를 마음껏 즐겨주세요.
Z1 등의 설치 히치 (한개의 바타입) 와 KZ1000계 (고 자형) 설치 히치가 다르므로 지정해 주십시오.
먼저 노멀시트를 떼어낸 곳에 슬림시트를 올려보세요. 문제없이 실리면
2. 시트피팅을 달아 옆트임용 프레임 스테이 전후에 달아보세요.
이때 피팅장착볼트는 풀어서 임시장착으로 해놓으십시오.
잘 닫히지 않는다, 들떴다가 닫힌다, 테일카울에 꽉 맞는 등 문제가 생기면 피팅의 높이 조정 등이 필요합니다.
잘 장착된 경우는 3으로.
3. 시트 뒷면 고무쿠션을 장착하세요. 거기서
앉아보니 시트가 뒤틀린다, 들뜨는 등 문제가 있다면 고무쿠션의 조정이 필요합니다.
평균적으로 닿을 수 있도록 높이 조정 등이 필요합니다
→ 문제없을 경우는 그것으로 끝입니다.
It is a necessity for the person who has trouble with the footing in Z1 / Z2 / KZ1000 series.
The seat leather is cut for the molding of the Slim & Slim seat sponge, so there is no unnecessary excess or shifting of the seat pattern downwards.
When you ride on it, you can see that the width is much narrower than stock.If you don't feel comfortable with your feet, you won't feel comfortable riding the bike, will you?
Please solve these problems and enjoy Z to the fullest.
The mounting hitch for Z1 (single bar type) and KZ1000 series (U-shaped) are different, so please specify.
1. Please put the slim seat on the place where the stock seat was removed.If I can get it on without a problem
Install the seat fitting to the front and rear of the frame bracket for horizontal opening.
At this time, loosen the fitting mounting bolts and leave them temporarily installed.therefore
If there is a problem such as it doesn't close properly, it lifts up and closes, or it hits the tail cowl tightly, you need to adjust the height of the fitting.
If the installation is successful, go to step 3.
3. Please install the rubber cushion on the back of the seat.therefore
If the seat is distorted or lifted, the rubber cushion needs to be adjusted.
It is necessary to adjust the height so that it hits on average.
If there is no problem, you are done.