[소재/재질] 알루미늄 단조 바디
[타입] 레버 타입: 라운드
[사양]
레버 릿지 비율:17mm
·지점-작용점:17mm
볼트 피치:P1.00
·가도식 레버
퀵 릴리스 마운트
파워레버 표준탑재
레이디얼 마운트
골드핀 표준장비
[실린더 지름] Φ14
*이 상품은 마스터 실린더 본체만입니다.
*브레이크/클러치 오일은 글리콜 에테르 계열만 사용 가능합니다.
*실리콘계 , 광물계의 브레이크 오일은 작동 불량 , 누수의 원인이 되므로 사용하지 마십시오
*장착 시 토크 관리를 제대로 하세요. M6고정 볼트의 조립 토크는 12N·m입니다.
* 차량 검사증에 기재된 차체고의 계측점이 마스터 실린더 (주로 마스터컵) 의 경우,±40mm를 넘는 변경은 구조 변경 절차가 필요합니다.
*메이커의 사정에 의해 상품의 사양변경이 있을 수 있습니다. 양해바랍니다.
[Material] Forged aluminum body
[Type] Lever type: Round
[Specification]
・Lever ratio: 17mm
・Fulcrum-action point: 17mm
・Bolt pitch: P1.00
・Foldable lever
・Quick Release Mount
・Power lever as standard equipment
・Radial mount
・Gold pin as standard equipment
[Cylinder diameter] Φ14
*This product is a master cylinder body only.
*Only glycol-ether based brake/clutch fluid can be used.
*Do not use silicone-based or mineral-based brake fluid as it may cause malfunction and leakage.
*Please control the torque sufficiently when you install it.The installation torque of the M6 clamp bolt is 12N-m.
*There may be changes in product specifications due to the manufacturer's reasons.