[변위]125cc
[보어 직경]53.5mm
[스트로크 길이]55.6mm
[압축 비율]10.8:1
[빅 스로틀 바디]포함되지 않음
- 이 제품은 재고품에만 설치할 수 있습니다.
- 이 제품은 Super Cub 110에 설치할 수 없습니다. (FI) (JA07-1000001~).
- 적용사양 : SP 다케가와 엔진 부품 및 배기 장치가 장착된 모델 (*FI-CONTROL 2)
- FI-CON 2의 작동 여부는 일본 사양으로 공식 판매된 모델에서만 확인되었습니다.. (*FI-CON 2)
- 병행 수입 모델과의 호환성은 확인되지 않았습니다.. (*FICON 2)
- SP 다케가와 엔진 부품이 장착된 모델용 제품입니다.. 타사 엔진 부품과 함께 사용하지 마십시오.. 엔진 오작동 또는 고장을 일으킬 수 있습니다.. (*FI-CON 2)
- 외부 H.I를 설치하지 마십시오.D 키트 또는 타사 LED 헤드라이트 또는 포그 램프 동시에. (*FICON 2)
- 일부 밸러스트 / 인버터 (전압 변환 장치) 디지털 회로에 악영향을 미쳐 제품 고장 또는 오작동을 일으키는 고전압 소음을 발생시킵니다.. (*FI-CON 2)
- 헤드라이트를 켜지 마십시오. / OFF 스위치와 외부 점화 시스템이 동시에 작동함. (*FI-CON 2)
- 사진은 참고용입니다.
- 본 제품은 모델 및 프레임 번호가 기재된 모델 전용입니다.. 다른 모델에는 설치할 수 없습니다.
[Set components]
・S-Stage Big Bore Kit (Part number: 01-05-0418)
Piston for stock head
Cylinder
Sports Camshaft
Gaskets
・FI Controller 2 / Injection Controller (Part number: 05-04-0007)
[Specification]
125cc
Bore Diameter: 53.5mm
Compression ratio: 10.8: 1
Included Camshaft: Sports Camshaft
Aluminum steel sleeve cylinder
High Compression Piston
*This product cannot be installed on other than stock head.
*This product cannot be installed on Super Cub 110 (FI) (JA07-1000001-).
*Specifications subject to: SP Takegawa engine parts and exhaust (*FI Controller 2)
*The FI-CON 2 has been tested only on vehicles officially sold in Japan.(*FI Con 2)
*The manufacturer has not confirmed the compatibility with non-Japanese motorcycles.(*FI Con 2)
*For vehicles equipped with SP Takegawa engine parts.Do not use in conjunction with engine parts made by other companies.Failure to do so may result in engine malfunction or failure.(*FI Con 2)
*Please do not install any aftermarket H.I.D kit or any other company's LED headlights or fog lamps at the same time.(*FI Con 2)
*Some ballasts / inverters (voltage conversion devices) emit high voltage noise that can adversely affect digital circuits, causing product failure or malfunction.(*FI Con 2)
*Please do not install the headlight ON / OFF switch and the aftermarket ignition system at the same time.(*FI Con 2)
*The description such as the photograph may differ from this part.
*There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.