[소재/재질] 크로 모리 강재 (3층 도금 마무리)
*메이커의 사정에 의해 상품의 사양변경이 있을 수 있습니다. 양해바랍니다.
[설치에 대해서]
액슬샤프트는 중요부품입니다.
설치 작업은 프로샵에서 반드시 자격자가 해야 합니다
샤프트의 헤드형상에 맞는 적정한 공구를 사용하여 작업을 해주세요.
부적정한 공구를 사용하여 결속하면 샤프트 표면에 도금된 도금 피막에 흠집이 나 녹의 원인이 됩니다.
설치 전에, 샤프트 표면에 그리스 등의 유지를 살포해 주십시오.
샤프트 표면에는 KOOD 오리지널 '3층 도금 피막 가공' 을 하고 있기 때문에, 통상 사용에서는 샤프트 자체로부터 녹은 발생하지 않습니다. 금속의 전위차이에 의해 발생하는 휠 베어링등으로부터의 이삭을 방지하기 위해서입니다.
·결속 토크는 메이커 지정치를 존중하여 주십시오.
·정품 너트를 사용하여 설치하는 차량에 있어서는 너트를 확인해 주십시오.
전도등으로 생긴 상처나, 셀프록 기능 부분의 마모가 너트로 보이는 경우는 반드시 신품 너트를 사용해 주세요. 샤프트의 나사부 손상을 방지하기 위해서입니다.
[상품 품질에 대해]
제품관리에 있어서는 만전의 체제로 제작·관리하고 있습니다만, 만일 불량품이 있는 경우는 작업전에 문의해 주세요.
* 어떠한 경우에도 설치 (휠에 샤프트를 통과시키는 등의) 작업 후의 클레임 및 반품에는 일절 대응하지 않습니다.
·녹슬어서
KOOD제 샤프트에는 '3층 도금 피막 가공' 를 베풀어 있습니다.
통상적인 도금 피막에 비해 견고한 피막 가공을 하고 있습니다. 사용 상황에 따라 녹이 발생할 수도 있지만 품질에는 문제가 없습니다.
<녹이 발생하는 주요 원인>
・ '옮겨 녹' ... 도금 표면에 외부로부터의 녹이 슬다
도금 피막 손상... 잘못된 공구 사용 및 주행 중 징검다리나 전도 등
*녹에 대해서는 품질보증 대상에서 제외하겠습니다.
미리 양해 부탁드립니다.
[Material] Chromoly steel (3-layer plating finish)
*There may be changes in product specifications due to the manufacturer's reasons.
[About the installation]
*Axle shafts are critical parts.
Installation must be carried out by qualified personnel at a professional shop.
・Please use the appropriate tool for the head shape of the shaft.
If the shaft is tightened with an inappropriate tool, the plating film on the shaft surface will be scratched and rust will be caused.
・Before installation, apply grease or other oil to the shaft surface.
The surface of the shaft is treated with KOOD's original "3-layer plating film", so rust will not occur on the shaft itself under normal use.The purpose is to prevent rust transfer from wheel bearings, etc., which is caused by the potential difference of metals.
・Please observe the tightening torque specified by the manufacturer.
・If the vehicle is installed using the stock nut, please check the nut.
If the nut is damaged by tipping over, etc., or if the self-locking part is worn out, be sure to use a new nut.This is to prevent damage to the shaft threads.
[About Product Quality]
・KOOD has taken all possible measures to manage the production. However, if there is any problem, please contact KOOD before the work.
*In no event will KOOD accept any claims or returns after the installation (such as threading the shaft into the wheel).
・About rust
KOOD shafts are treated with a "3-layer plating film".
It is processed with a stronger film than normal plating film.Rust may occur depending on the usage conditions, but there is no problem with the quality.
・Transferred rust: Rust from the outside gets on the plated surface
・Damage to the plating film... Improper use of tools, flying rocks during riding, falls, etc.
[Caution]
In case of KOOD shafts with plated nuts, damaging the threads during installation often happens.
Due to the nature of plating, this is often seen when the plated parts (e.g. KOOD shaft and KOOD nut) mesh with each other or when the threaded part is greaseless.
Please use an anti-corrosive grease such as sledge compound on the screw part when you install it.