고휘도이면서 저소비 전력을 실현하여, 주행 시 시인성이 향상되는 'LED 안개등 키트'
■ 상세
안개등을 사용함으로써, 짙은 안개나 폭우시에, 헤드라이트로 비추지 않는 부분을 보완하여, 주행시의 시인성 향상 및 야간 주행시의 안전성을 높일수 있습니다.
또, 고휘도에 의해, 야간에 차량의 존재감을 높여 다른 라이더나 차로부터의 인식이 쉬워져, 사고 방지 대책으로서도 공헌합니다.
조사 범위는 스폿 조사와 플랫 조사를 균형 있게 결합함으로써 헤드라이트에서는 비춰지지 않는 부분을 보완해 주는 조사 범위로 했습니다
본 제품은 차량의 카울 가공 및 배선 가공의 필요가 없다, 키트의 구성 부품이, 안개등을 쉽게 설치 할 수 있습니다.
포그램프측기보시장착가공가능.
포크 클램프 홀더에는 알루미늄 절삭 알루마이트 마감, 포그 램프 스테이에는 알루미늄 다이캐스트제 배럴 연마 마감 (SP타케카와 로고포함) 를 채용.
■ 고휘도 LED칩 채용
LED칩은 매우 고휘도면서 저소비 전력 (약 6.5W) 를 실현하고 소배기량 차 등, 발전량이 크지 않은 차량이라도 사용 가능합니다.
■SP 다케카와제 콤팩트 LED 서모미터와 동시 장착 가능
LED fog light kit" that realizes low power consumption while high brightness and improves visibility when driving.
■Details
By using fog lamps, you can make up for the parts that cannot be illuminated by the headlights in thick fog or heavy rain, and improve the visibility and safety when driving at night.
In addition, the high luminance enhances the presence of the vehicle at night, making it easier for other riders and vehicles to recognize it and contributing to accident prevention measures.
The irradiation range was made to compensate for the part that cannot be illuminated by the headlight by crossing the spot irradiation and the flat irradiation in good balance.
This product does not require any modification of the vehicle's cowl or wiring, and the fog lamp can be easily installed with the kit's components.
There is a processing of the installation of the crimp on the fog lamp side.
The fork clamp holder is made of machined aluminum with anodized finish, and the fog lamp bracket is made of die-cast aluminum with barrel polished finish (with SP Takegawa logo).
■Adoption of high brightness LED chip
The LED chip realizes low power consumption (approx. 6. 5W) with very high brightness, and can be used even for vehicles with small displacement and not so large power generation.
■It can be installed together with SP Takegawa's compact LED thermometer