● 정비성을 중시하여 전체 각도를 설정.
캘리퍼 정비, 액슬 샤프트 탈부착 등이 용이합니다.
● 5단계 높이 조절 기능 (조정폭 시스템 하의 높이로 약 710mm-830mm)
● 녹, 상처에 강한, 스테인리스 (SUS304#400연마 소재) 를 사용.
언제까지나 아름다운 빛을 유지하겠습니다.
● 호화로운 스테인레스 절삭을 베이스로하여 절묘한 각도로, 시스템 아래의 좁은 위치에 딱 들어맞습니다.
● 절첩식 상품이어서 보관, 이동시에 자리를 잡지 않습니다.
● 프론트 주변의 유지보수는 물론, 겨울철 등의 장기 보관시에도 사용해 주십시오.
●배틀팩토리사의 리어스탠드와 병용함으로써 안정성이 좋아집니다.
프론트 스탠드는 바퀴가 땅에 있고 리어스탠드는 바퀴가 뜰 것입니다
리어 스탠드 바퀴가 뜨기 때문에 스탠드 본체가 지면에 도착해 안정적입니다.
리어스탠드 캐스터가 바닥에 닿으면 차량이 앞뒤로 움직이며 불안정해집니다.
●스탠드보스를 교환 가능하도록 설계함으로써, 복수의 차량을 소유하시는 분도, 옵션 부품의 보스를 교환하시는 것만으로 사용할 수 있습니다.
보스는 13mm에서 28mm를 설정.
일반적인, 스트리트용 스탠드와는 달리 정비제와 운반의 편리성을 중시하기 때문에, 시스템 내경과 스탠드 보스의 클리어런스는 내경이 20미만은 약0.5mm, 20이상의 경우 약1mm이하가 되도록 선택해 주십시오.
삽입 부분을 짧게 하고, 공간을 좁게 하여 최적의 각도에서 스탠드 업을 할 수 있도록 생각하고 있습니다.
또, 탈착성도 고려되고 있습니다.
●The overall angle is set for ease of maintenance.
Easy maintenance of calipers and removal of axle shafts.
●5-step height adjustment (adjustable range: approx. 710mm - 830mm at the height below the stem)
●Made of stainless steel (SUS304 #400 polishing material) to resist rust and scratches.
Maintains a beautiful shine for a long time.
●The base is made of luxurious stainless steel and is perfectly angled to fit in the narrow space under the stem.
●It's a foldable product, so it doesn't take up a lot of space when it's stored or moved.
●Please use it not only for the maintenance around the front, but also for the long-term storage in winter.
●Use with Battle Factory rear stand for better stability.
The front stand has the casters on the ground and the rear stand has the casters floating.
Because the caster of the rear stand floats, the main body of the stand touches the ground and becomes stable.
If the caster of the rear stand is on the ground, the vehicle will move back and forth and become unstable.
●The stand bosses are interchangeable, so even if you own multiple vehicles, you can use the stand simply by replacing the bosses with optional parts.
Bosses are available from 13mm to 28mm.
The clearance between the inner diameter of the stem and the stand boss should be less than 0.5mm if the inner diameter is less than 20mm and less than 1mm if the inside diameter is more than 20mm.
It is designed to be able to stand up at an optimum angle by shortening the insertion part and narrowing the clearance.
It is also designed to be easily detachable.