[재료]두랄루민 A2017
[색깔]
탑 브리지 : 블랙 또는 브라운
핸들바 : 검은
스템 너트 : 경질 양극화 알루미늄
[핸들 위치]
1-포지션 : 스트리트 하이 (STD) (* CAFE는 1-포지션에만 사용 가능)
[핸들바]
전체길이:280mm
내경:16mm
[행 앵글]
거리:+5도.
레이싱:-5도 (CAFE 지원되지 않음)
[개방각 / 높이]무료
[핸들바 잠금]사용 가능
[핸들바 스톱퍼 기능]사용 가능
[브레이크] / 클러치]
OEM 브레이크 마스터, 클러치 홀더와 호환 가능
(*애프터마켓 제품으로 교체하거나 배선을 변경하려면 브레이크 호스가 필요합니다.)
[와이어]
OEM과 호환 가능
(*가속기 와이어, 클러치 와이어 및 스위치 케이블을 변경해야 함)
[사양]
전용 미터 브래킷 포함
OEM 라이트 브래킷, 미터, 경음기 등을 사용할 수 있습니다.
* 기타 색상은 상품 이미지로 표시될 수 있습니다.. 위에 표시된 색상 정보를 참조하십시오.
*높이 및 너비가 스톡에서 변경되기 때문에 공공도로 주행에 맞게 조정하기 위한 구조 변경이 필요합니다.. 구조변경을 신청하지 않고 자전거 등록정보를 변경할 경우 공공도로에서 이용할 수 없다.
*이 키트는 Z900RS CAFE 전용이며, 설치에 필요한 부품이 포함되어 있습니다.. 뚜껑이 없는 Z900RS의 경우 다른 부품 번호를 구입하십시오.
*설치를 위해서는 전문적인 지식과 도구가 필요하오니 설치 전문지식이 풍부한 전문샵에 문의하시기 바랍니다.
*Z900RS CAFE의 직급은 한정되어 있습니다. 구매 전에 다음 사항을 읽어보시기 바랍니다.
*Z900RS CAFE는 재고 깜빡이에 대한 간섭을 피하기 위한 위치 제한이 있습니다.. 호환되는 위치는 Street Hi입니다. (STD) 오직 한 가지
*마스터 실린더 자체가 표시기에 가까우므로, 마스터 실린더의 설치 각도가 제한됩니다.. 인디케이터에 닿지 않도록 각도를 조절해 주세요.
*뚜껑의 간섭을 방지하기 위해 뚜껑, 미터기 및 조명이 전면으로 오프셋됩니다.
* 리어 뷰 미러를 장착할 때 미러 클램프를 탈거해야 합니다.. 미러가 핸들 바에 고정되어 있으면 미러를 교체할 수 없습니다.. 미러 유형에 따라 뚜껑의 간섭으로 인해 설치가 불가능할 수 있습니다.
*사진에 표시된 거울은 Z입니다.I type 단기 체류.
*핸들바는 고정 스위치 BOX이기 때문에 드릴링이 필요합니다.
*제조업체 사정으로 인해 제품 사양이 변경될 수 있습니다.
[Material] Duralumin A2017 material
[Color] Handlebar: Black
[Surface treatment] Stem nut: hard anodizing
[Handlebar position] 4 positions: Street Hi (stock) *CAFE only supports one position
[Handlebar Size]
・Total length: 280mm
・Inner diameter: 16mm
[Sweep angle]
・Street: +5 degrees
・Racing: -5 degrees
[Opening angle / Height] Free
[Handlebar locks] Available
[Handlebar stopper function] Available
[Specification]
・Compatible with stock brake master
・Compatible with stock clutch holder
・Confirmed Brembo RCS brakes
・Stock light bracket, meter, horn, etc. can be used
[Components]
・Special meter brackets
・Exclusive collar set
*Brake / Clutch*
・Depending on the position, the oil tank and clutch wire may interfere with the meter cover.
・The brake hose needs to be changed to an aftermarket one or the routing needs to be changed.
*Wires*
・The accelerator wire, clutch wire, and switch cables need to be changed.
*Position Details*
・When installing the fork clamps, the clamp bolts should face outward with the handlebar clamp attachment pointing upward.
・The handlebar clamps face +5 degrees in the straddled position.
・Other positions cannot be installed as they will interfere with the stock blinkers.
*The direction of the vehicle is determined by riding on the vehicle.
*This kit is specially designed for Z900RS CAFE with additional parts required for installation.For Z900RS without cowl, please purchase another part number.
*Z900RS CAFE has a limitation on the position to avoid interference with the stock blinkers.Please read the following notes before purchasing.
*Only Street Hi (stock) position is compatible.
・Since the master cylinder is close to the blinker, the installation angle of the master cylinder is limited.Adjust it so that it does not touch the blinker.(See image)
・In order to prevent interference with the cowl, the cowl, meter and light will be offset to the front.(See image)
・When installing the rearview mirror, it is required to remove the mirror clamps.Please note that the mirror cannot be replaced if it is fixed to the handlebar.Depending on the type of mirror, it may not be able to be installed due to interference with the cowl.
*The light bracket, meter, horn, etc. can be used with the stock products.
*Hole drilling to the handlebar is required to fix the switch box.
*Installation requires specialized knowledge and tools, so please contact a professional shop for installation.
*The mounting mirror in the image is ZII type short bracket.
*Images may contain other products.
*The image may contain other colors.
*There may be changes in product specifications due to the manufacturer's reasons.