정품 리어 서스펜션 전용
대응 사이드 케이스 : E22 전용
* 국내 사양은 불가합니다.
* DLM36 알루미늄 사이드 케이스 설치 불가합니다.
*순정 프레임 그립 (좌우) 을 떼어서 장착합니다.
*순정 리어 사스의 탈착이 필요한 때문에 충분한 정비 능력·설비가 있는 판매점에서 작업하세요.
*순정 OPTION글러브 레일/리어 경력은 동시 장착할 수 없습니다.
* 국내 사양은 불가합니다.
* GIVI사 피팅 및 데이토나 오리지널 피팅은 GIVI 이외의 케이스에는 사용하지 마십시오. GIVI 이외의 케이스에 사용했을 경우 어떠한 경우에도 데이토나사 및 GIVI사에서는 일절 책임지지 않습니다.
* 제품소재 및 제조방법, 제품개체차이, 해외수송사정 등에 따라 도장이나 용접, 표면처리의 차이나 버, 왜곡등이 있을 수 있습니다. 이점 양해바랍니다.
*제품과 차량의 개체차로 인해 구멍차이나 전후좌우 평행도의 차이, 차체 카울등과의 접촉이 생기는 경우도 있으므로 장착작업은 설비가 잘 갖추어진 오토바이 가게나 인증정비공장등의 숙련된 정비사에게 의뢰하는 것이 좋습니다. 또한 설치는 각부품을 일단 가류하고 상태를 보면서 최종적으로 본조임을 해 주세요.
*메이커의 사정에 의해 상품의 사양변경이 있을 수 있습니다. 양해바랍니다.
Exclusive for stock rear suspension
Compatible Side Cases: E22 only
*It takes more than 120 days to deliver the product from Italy.
*Additional work may be required and it may be difficult to install on the vehicle.
*Not available for Japanese use.
*DLM36 aluminum side cases cannot be installed.
*Remove and install the stock frame grips (left and right).
*Since it is necessary to remove and install the stock rear suspension, please have it done by a dealer with sufficient maintenance capabilities and equipment.
*The stock OPTION grab rail and rear carrier cannot be installed at the same time.
*Not available for Japanese use.
*GIVI fittings and Daytona original fittings should not be used on non-GIVI cases.Daytona and GIVI cannot be held responsible in any way for the use of non-GIVI cases.
*There may be differences in painting, welding, surface treatment, scratches, burrs, and distortions due to product materials, manufacturing methods, individual product differences, and overseas shipping conditions.
*Due to the individual difference between the product and the vehicle, there is a possibility of hole misalignment, difference in parallelism between front and rear, left and right, and contact with the vehicle cowl, etc. Therefore, it is recommended to have the installation work done by a skilled mechanic at a well-equipped motorcycle shop or certified maintenance facility.For installation, temporarily fasten each part and finally tighten them while observing the condition.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.