차종별 전용 설계의 프론트 액슬 슬라이더 세트 레이싱 타입.
휠 탈부착 시 번거로움이 적은 정비성이 뛰어난 타입입니다.
서킷 주행이 메인으로, 자주 휠을 탈착하는 라이더에게 추천.
넘어질 때 파손되기 쉬운 액슬 너트나 포크 바텀 등을 보호합니다.
전후 모두 CNC머시닝 가공된 6061알루미늄과 델린 수지에 따른 제조.
· 넘어졌을 때 차체 파손 방지에
·차종별 전용 설계로 뛰어난 핏 구현
·프론트는 좌우 분할 타입으로 샤프트 관통형의 기존 제품에 비해 정비성이 향상
·선택할 수 있는 컬러링으로 차체에 맞춘 드레스업이 가능
· 수지 슬라이더는 교환 가능. 슬라이더 단품도 라인업
앞 슬라이더는 2피스 구조
샤프트 측 (진행 방향에서 보고 오른쪽) 는 앵커 볼트와 핸드 가드 바 앤드의 일에, 슬라이더의 부착 볼트를 체메입무면 샤프트에서 돌았기 때문에 슬라이더가 잠겨집니다.
액슬 너트쪽은 슬라이더 자체가 너트로 되어 있어 스패너를 사용하여 너트를 조입니다.
기존의 슬라이더는 액슬 샤프트를 관통하는 타입으로, 휠을 분리할 때마다 슬라이더도 분리해야 했습니다
그러나 이 슬라이더라면 그 수고가 없어져, 슬라이더가 없는 액슬과 다름없이 프론트휠 탈부착이 가능합니다.
스페어 슬라이더는 SMR용을 사용해 주십시오.
Front Axle Slider Set specially designed for each model Racing Type.
This type of wheel is easy to maintain and less troublesome to remove and install.
Recommended for riders who mainly ride on the circuit and frequently change wheels.
Protects axle nuts and fork bottoms which are easily damaged in a fall.
Manufactured from 6061 aluminum and Delrin resin, CNC machined front and rear.
・To prevent damage to the vehicle body when it falls over
・Specially designed for each model to ensure a perfect fit
・The front is a right and left split type, which improves serviceability compared to the conventional through-shaft type
・A choice of colors allows you to dress up your vehicle
・The plastic slider is replaceable.Slider is also available by 1pc.
Two-piece front slider construction.
The shaft side(right side when viewed from the direction of travel) is like an anchor bolt or a bar end of a handguard. When the slider mounting bolt is tightened, it expands in the shaft and the slider is locked.
On the axle nut side, the slider itself is a nut, and you can tighten the nut with a spanner.
Conventional sliders were designed to go through the axle shaft and the slider had to be removed every time the wheel was removed.
However, with this slider, you don't have to do that and you can remove the front wheel as same as the axle without slider.
Please use the spare slider for SMR.