[소재/재질] 鉄 (전착 도장+분체 도장 마무리)
[칼라] 블랙
[중량(약)] 박스중량 : 4.8kg
[치수(약)] 박스 안치수 : 폭 555mm X 깊이 370mm X 높이 280mm
[설치 시간] 0.3h
[카울 등의 가공] 불필요
[최대 적재량]
·캐리어:10kg
박스:3kg
[세트 내용] 취급설명서 참조
·탠덤 그립 부착 리어 캐리어 X1개
·투어링 리어 박스 50L 블랙 X 1개
[업체 보증기간] 6개월 (또는 설치 후 주행 거리 5000km까지)
*적재량을 넘지 않도록 이용하십시오.
*타 상품과의 조합설치는 조합표를 확인하신 후 설치해주세요.
* 이미지의 차량에 장착되어 있는 BOX 및 치수 표시 BOX는 구 디자인의 BOX 이미지입니다.
*이미지 내 * 2모든 제조사 / 타입의 범용 베이스를 지원한다는 것을 보증하지는 않습니다.
*장착시간은, 오토바이에 관한 정비의 일반적인 지식 및 기능을 가지는 국가 자격을 가진 정비사 분으로서, 또한 필요한 공구를 이미 가지고 계신 분을 전제로 하고 있습니다.
*적합 차종에 기재된 차종 이외의 장착확인은 하고 있지 않습니다. 기재되지 않은 차종은 장착불가 또는 미확인 상태입니다.
*적합 차종에 기재되지 않은 차종에 대한 설치는 보증하기 어렵습니다.
*상품의 색감은 촬영 조건이나 모니터, 상품 로트와 세트 상품의 좌우에서 다른 경우가 있습니다.
*본 상품은 상품의 형상 및 제조 공정의 특성상, 착색시의 전극 자국이나 에어 포켓에 따른 색상 편차가 발생합니다.
*이미지에는 다른 타입, 상품이 포함되어 있습니다.
*메이커의 사정에 의해 상품의 사양변경이 있을 수 있습니다. 양해바랍니다.
[Material] Iron (electrodeposition coating + powder coating finish)
[Color] Black
[Weight (approx)] Box weight: 4.8kg
[Dimensions (approx)] Box inner dimensions: Width 555mm X Depth 370mm X Height 280mm
[Installation time] 0.3h
[Modification of the cowl, etc.] Not required
[Maximum loading capacity]
・Carrier: 10kg
・Box: 3kg
[Components] Refer to the instruction manual
・Rear rack with pillion grip x 1pc
・Touring rear box 50L Black x 1pc
*Please do not exceed the load capacity.
*Please refer to the combination list for installation with other products before installation.
*The box installed on the vehicle in the image and the box shown in the dimensions are images of the old design box.
*In the image* 2 Not guaranteed to be compatible with all makers / types of universal bases.
*The installation of models is not checked other than those listed in the compatibility check list.If your vehicle is not listed, it cannot be installed or has not been tested.
*The installation of the product to the models that are not listed in the compatibility check list is not guaranteed.
*The color of the product may vary depending on the shooting conditions, monitor, product lot, and left and right of the set product.
*Due to the characteristics of the product shape and manufacturing process, this product may have uneven color due to electrode marks and air accumulation during coloring.
*Image includes other types and products.
*There may be changes in product specifications due to the manufacturer's reasons.