미니 바이크 부품 메이커인 KITACO와 서스펜션 부품으로 실적이 높은 GEARS와의 공동 개발.
스트리트나 서킷에서 주행 테스트를 거듭해, 주로 롱 투어링에서의 고적재시나, 엔진 튜닝 차량등의 고부하시 쾌적한 필링을 유지할 수 있도록, 최적인 스프링 레이트와 댐퍼 특성을 설정.
차높이 조정, 신장측 감쇠력 조정, 프리로드 조정 기구를 갖추어 상황에 따라 폭넓게 설정할 수 있습니다.
스트리트에서의 주행 성능 향상 추구.
화물 만재시에도 우수한 주행 성능을 발휘하여 적재량이 많아지는 중-장거리 투어링시에도 쾌적하게 주행할 수 있는 하이 그레이드리아 쇼크 업소버입니다.
■ 모노튜브 - 오일 & 가스실 분리형 설계
오일&가스실 세퍼레이트 설계는 하나의 실린더를 가스실과 오일실을 프리 피스톤으로 나눈 구조로 오일과 가스에 포함된 공기 (수분) 이 캐비테이션을 제거하는 데 도움이 됩니다.
모노튜브 방식으로 타사에 없는 큰 가스실을 마련하여 고압가스를 확실히 확보.
안정된 감쇠를 유지할 수 있습니다.
또한 방열성이 있는 알루미늄 튜브로 접동 운동하는 감쇠력으로부터 열흘림 (캐비테이션) 을 줄임으로써 연속적으로 안정된 성능을 발휘합니다.
■패키징
패키지에는 콜라보 전용 특별 디자인 채택.
■콜라보 특별 레이저 인쇄
'KITACOXGEARS Assembled in Japan'이라고 레이저인자가 되어있습니다.
* 차종에 따라 인쇄되는 위치 (면) 는 바뀝니다.
■생산에 있어서
세계 톱 클래스의 절삭 기술을 자랑하는 대만 GEARS 본사에서 제작된 각 부품을 GEARS JAPAN에서 하나씩 장인의 손으로 조립.
오일, 가스의 봉입으로부터 세계 최고봉의 서스펜션 테스터에서의 동작 확인 및, 덤핑 특성을 측정해, 세팅.
고도의 품질관리 하에 높은 성능과 타협하지 않는 높은 퀄리티를 실현하고 있습니다.
KITACO, a mini bike parts manufacturer, and GEARS, a famous suspension parts manufacturer, have collaborated to develop this product.
The optimum spring rate and damper characteristics have been set to maintain a comfortable feeling under high load conditions, mainly for long touring and engine tuning vehicles.
Equipped with ride height adjustment, rebound damping force adjustment, and pre-load adjustment mechanism, it is possible to set a wide range of settings depending on the situation.
Pursued to improve driving performance on the street.
This is a high grade rear shock absorber that provides excellent driving performance even when fully loaded with luggage, and is also comfortable for medium to long distance touring when the load capacity increases.
■Monotube - Separate oil and gas chamber design
The separate oil and gas chamber design is a single cylinder with a free piston that separates the gas chamber from the oil chamber to help eliminate cavitation caused by the air (moisture) in the oil and gas.
The monotube system has a large gas chamber, which other companies do not have, to secure the high-pressure gas.
You can maintain stable damping.
In addition, the heat-dissipating aluminum tube reduces heat avalanches (cavitation) from the sliding damping force, thereby ensuring stable and continuous performance.
■Packaging
The package is specially designed for the collaboration.
■Collaboration special laser printing
KITACO x GEARS Assembled in Japan is laser printed on the front cover.
*The place (surface) to be printed varies depending on the model.
■Production
Each part is made at GEARS head office in Taiwan, which boasts the world's top class cutting technology, and assembled by craftsmen in GEARS JAPAN one by one.
From the filling of oil and gas to the operation check with the world's best suspension tester, the damping characteristics are measured and set.
High performance and uncompromisingly high quality are realized under the advanced quality control.