[칼라] 실버 ( 알루미늄 소지 RAW)
[상품 내용]
· 세퍼레이트 핸들 베이스 본체
대량 예금 스테인리스 볼트 세트
· 재질 A6061
*메이커의 사정에 의해 상품의 사양변경이 있을 수 있습니다. 양해바랍니다.
* 이미지에는 다른 상품, 색상이 포함되어 있을 수 있습니다.
*이 제품은 ZOOMER전용품입니다.
*설치에 있어서는 상품 구성을 충분히 이해 준 후 구입을 부탁 드립니다.
* 캐블레이터 차량, 인젝션 차량 모두 장착 가능하나 장착되는 브레이크 마스터나 레버 홀더, 스로틀 하우징에 따라서는 장착이 불가능할 수도 있습니다.
* 설치가 불안하신 분은 가까운 기술자에게 상담하여 검토하시기 바랍니다. (설치설명서 등의 준비는 없으므로 미리 양해바랍니다.)
* 실버 (raw) 은 알루미늄 소지가 됩니다. 알루마이트 가공이 되어 있지 않습니다.
*알루미늄 소지로 인해 부식등이 발생하므로 광택을 유지할 경우에는 피카루나 화이트 다이아몬드로 정기적으로 연마 작업을 해주세요.
* 핸들위치가 낮아지기 때문에 정품 핸들스위치 BOX는 액슬 와이어가 프론트 BOX와 간섭될 수 있습니다.
* 하이스로틀화의 동시 시공을 권장합니다.
* 미터 마운트용 스테이는 포함되어 있지 않습니다.
* 별도 미터기 이설 및 미터기 제작 부탁드립니다.
*스테이 작성시 참고사진 내 치수도면이 있으니 참고바랍니다.
* 세퍼레이트 핸들 바를 짜넣는 클램프 부분은 Φ35이므로, 범용품인 Φ35 사이즈의 클램프나, 클램프&바킷트를 구매해 주십시오.
[Color] Silver (Aluminum bare metal RAW)
[Product Description]
・Clip-on Handle Base Unit
・Stainless steel bolts for mounting
・Material A6061
*There may be changes in product specifications due to the manufacturer's reasons.
*Images may contain other products and colors.
*This product is exclusive for ZOOMER.
*Please make sure you fully understand the configuration of the product before purchasing.
*It can be installed on both carbureted and injected vehicles, but may not be able to be installed depending on the handle and lever holder throttle housing.
*If you are not confident about the installation, please consult your local technical shop before considering.(Please note that there are no installation manuals available.)
*Silver (RAW) is bare aluminum.Not anodized.
*Because of the aluminum base material, corrosion and other problems may occur, and If wishing to keep the luster, please polish it with Pikal or White Diamond periodically.
*Since the handlebar position is lowered, the axle wire may interfere with the front box when using the stock handlebar switch box.
*It is recommended to install the high throttle system at the same time.
*Meter mount bracket is not included.
*Please relocate the meter or make a meter bracket separately.
*Please refer to the dimensional drawing in the reference photo as making the bracket.
*Φ35 clamps are used for separate handlebars, so please universal Φ35 size clamps or clamp & bar kits.