공기 연료비계
미터 사이즈:약 57mmX약 29mmX약 12mm
미터 작동 전압 범위:DC10V-DC16V
*장착 영상은 이미지에요.
*본 제품을 사용할 때는 드릴에 홀 가공을 하고 부속 센서 보스를 용접으로 부착해야 합니다
*익조스트 파이프에 대한 홀 가공 위치 (센서 부착 위치) 에는 조건이 있으므로, 설명서에 명기된 '센서의 설치 방법'을 확인하신 후에 홀 가공이나 센서 장착 보스의 용접을 실시해 주세요. 센서의 설치 조건을 만족하지 않는 경우, 공연비가 올바르게 표시되지 않는 경우가 있습니다. 주의해 주십시오.
*레이싱 플러그 사용이나 플러그 캡, 하이텐션 코드를 순정품 및 SP무천 제품 이외의 부품으로 변경했을 경우, 노이즈에 의해 작동이 불안정해질 수 있습니다.
*사외품의 H.I.D키트와 타사 제의 LED헤드 라이트와 안개등류는 절대 동시 착용하지 마세요. 밸러스트/인버터 (전압 변환 장치) 에서 디지털 회로에 악영향을 주는 고전압 노이즈가 나오는 것이 있다, 제품 고장, 동작 불량의 원인이 됩니다.
*전조등 ON/OFF스위치, 사외품 점화 장치의 동시 장착은 하지 마세요.
*메이커의 사정에 의해 상품의 사양변경이 있을 수 있습니다. 양해바랍니다.
air-fuel ratio meter
Meter Size: About 57mm x about 29mm x about 12mm
Meter operating voltage range: DC10V-DC16V
*Installation image is for reference only.
*When using this product, it is necessary to make a hole in the exhaust pipe and weld the attached sensor boss to the pipe.
*Because there are some conditions for the hole drilling position (sensor installation position) on the exhaust pipe, please check the "How to install the sensor" specified in the instruction manual before drilling the hole and welding the sensor installation boss.If the installation conditions of the sensor are not met, the A/F ratio may not be displayed correctly.
*If you use racing plugs or change the plug caps or high tension cords to other than stock or SP Takegawa products, the operation may become unstable due to noise.
*Please do not install any aftermarket H.I.D kit or any other company's LED headlights or fog lamps at the same time.Some ballasts / inverters (voltage conversion devices) emit high-voltage noise that adversely affects digital circuits, causing product failure or malfunction.
*Please do not install the headlight ON / OFF switch and the aftermarket ignition system at the same time.
*There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.