[보아 지름] 76mm (노멀 보아)
[스트로크 동량] 55mm (노멀 스트로크)
[압축비] 12.2:1
[세트 내용]
·단조 피스톤
피스톤 링
피스톤 핀
피스톤 서크 립
실린더 헤드 가스킷
실린더 패킹
텐 쇼나ー 리프터 가스킷
*노멀 헤드 이외에는 설치 할 줄 모릅니다.
*FI컴퓨터 2 (인젝션 콘트롤러) 동시 사용이 필요합니다. 타사 제품과의 조합은 고장의 원인이 됩니다.
* 노멀 실린더를 재사용하나 피스톤 클리어런스가 규정치외일 경우에는 실린더의 호닝가공이 필요합니다.
* FI콘 2는 네가지가 있습니다. 조심하세요.
·CBR250R (MC41-1000001부터 1399999) 用
·CBR250R (MC41-1400001에서 1499999) 2등 헤드라이트 모델용 * CBR250R (MC41-1500001 이후) 용건은 FI콘2는 판매하지 않습니다
·CRF250L (MD38) 用
· CRF 250L · CRF 250 RALLY (MD44) 用
*메이커의 사정에 의해 상품의 사양변경이 있을 수 있습니다. 양해바랍니다.
[Bore diameter] 76mm (Stock bore)
[Stroke amount] 55mm (Stock stroke)
[Compression ratio] 12.2: 1
[Set components]
・Forged Piston
・Piston ring
・Piston pin
・Piston Circlip
・Cylinder head gasket
・Cylinder gasket
・Tensioner lifter gasket
*This product cannot be installed on other than stock head.
*FI Controller 2 (Injection Controller) must be installed at the same time.The combination with the products of other manufacturers may cause failure.
*The stock cylinder can be reused, but if the piston clearance is outside the specified value, honing of the cylinder is required.
*There are four types of FI-CON 2.
*For CBR250R (MC41-1000001 to 1399999)
*For CBR250R (MC41-1400001 to 1499999) 2 lamp headlight model *FI-CON 2 is not available for CBR250R (MC41-1500001 or later).
*For CRF250L (MD38)
*For CRF250L・CRF250 RALLY (MD44)
*There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.