[소재] 본체 : 플라스틱 커버 : 알루미늄
[치수]
본체치수 : 폭 30mm X 높이 20mm X 깊이 61mm (방수캡 제외)
핸들클램프 치수: 폭 약17mm / 적용핸들경: Φ22.2-Φ25.4
케이블 길이 : 약 2160mm
[키트 내용]
· USB 전원 본체 (방수캡 포함)
· 배터리 직접 연결 케이블
손잡이 클램프
· 십자홀이있는 스크류
·스페이서 (핸들클램프용)
·결속 밴드 (대X1, 소X2)
·양면 테이프
·캡 분실방지 스트랩
*방수성은 방수캡을 올바르게 장착할 때에 확보됩니다. USB전원사용중에는 방수가 아닙니다.
* 본체의 방수 캡을 제거했을 때는 반드시 분실방지용 스트랩을 부착한 상태에서 본체의 후면쪽에 끼워주세요.
*USB의 출력성능은 접속하는 케이블 및 단말기로 제어되므로 반드시 최대전류로 출력된다고는 할 수 없습니다.
* 본체의 금속 표면은 알루마이트 마감입니다. 시간이 지남에 따라 백색화되는 경향이 있으나 불량은 아닙니다.
* 전원 케이블을 배터리에 직접 연결하면 메인 키가 OFF (주차시) 하지만 USB의 전원을 연결할 수 있는 장점은 있지만, 장난 방지를 위해서는 액세서리 전원 (메인키 연동) 접속을 권장합니다.
*설치에는 배선가공이 수반되므로 바이크 및 전기에 대한 전문지식이 필요합니다. 바이크샵 및 정비사 자격을 가진 작업자에게 본 제품의 설치를 의뢰해 주십시오.
* 본 제품의 출력구 는 USB (A) 됩니다. Type-C는 직접 연결할 수 없습니다.
* Apple 제품 ( iPhone や iPad ) 로 연결된 케이블은 M-인증품 또는 Apple 정품입니다.
* 연결 후의 배선은 여유를 가지고 돌려, 주행중에 지장을 초래하지 않도록 고안해야 합니다. 핸들과 프레임의 여러 곳을 따라 돌려, 결속 밴드를 사용하여 부착해 주십시오.
* 이미지에는 다른 상품, 색상이 포함되어 있을 수 있습니다.
*메이커의 사정에 의해 상품의 사양변경이 있을 수 있습니다. 양해바랍니다.
[Material] Body: Plastic, Cover: PlasticAluminum
[Size]
Main unit dimensions: Width 30mm x Height 20mm x Depth 61mm (excluding waterproof cap)
Handle clamp dimensionsWidth: approx. 17mm / Applicable handle diameter: approx.Φ22.2-Φ25.4
Cable Length: Approx. 2160mm
[Kit Contents]
・USB power supply unit (with waterproof cap)
・Direct battery connection cable
・Handle clamp
・Cross-holed screws
・Spacer (for handle clamps)
・Bundling bands (large x 1, small x 2)
・Double-sided tape
・Lost cap prevention strap
*Water resistance is ensured when the waterproof cap is properly installed.Not waterproof while using USB power.
*When removing the waterproof cap of the main unit, be sure to place it on the back side of the main unit with the strap attached to prevent it from being lost.
*USB output performance is controlled by the cable and terminal to be connected, so the maximum current output may not always be achieved.
*The metal surface of the main body has an anodized finish.The color tends to whiten with age, but this is not a defect.
*However, to prevent tampering, we recommend connecting to the accessory power source (linked to the main key).
*Installation involves wiring modification, so expertise in motorcycles and electricity is required.Please ask a motorcycle store or a qualified mechanic to install this product.
*The output port of this product is USB(A).Type-C cannot be connected directly.
*Please use M-certified or stock Apple products for the connection cable to Apple products (iPhone and iPad).
*Wiring after connection should be routed with plenty of room so that it does not interfere with driving.Install by routing along various parts of the handle and frame and using cable ties.
*Images may contain other products and colors.
*There may be changes in product specifications due to the manufacturer's reasons.