폴리카보네이트 프로텍터 표준 장비.
바엔드 장착 타입의 핸드 가드 폴리카보네이트 (PC) 프로텍터를 표준 장비한 스타일리시한 핸드 가드
자외선, 저온, 고온에 강한 폴리카보네이트의 충격 내구성 (PC) 는, 차량의 스타일을 가리지 않는 범용성 높은 심플하고 스타일리시한 디자인.
방풍효과를 향상시킬 뿐만 아니라 정면충격을 완화하는 기능도 갖추었다.
설치는 핸들 바 엔드에 고정하기만 하면 되는 간단 장착.
기존의 핸드가드와 같은 복잡한 작업은 불필요하면서도 절삭가공으로 만들어진 고강도 알루미늄 합금 바엔드 플러그로 견고하게 고정.
보호대를 분리하여 사용하거나 다른 디자인의 ZETA 프로텍터도 장착하여 원하는 스타일링을 즐길 수 있다.
■암볼트를 풀면, 바엔드를 축으로 상하 무단계 각도 조절이 가능.
■전용 스페이서에 의해, 센터 포지션부터 1단계 5도씩, 위 4단계, 아래 4단계, 합계 9단계 위치 조절이 가능.
손쉽게 원하는 스타일링에 맞출 수 있다.
■ 바엔드 플러그의 홈으로 차량에 맞춰 암 위치를 2단계로 조절 가능.
본체의 탈락을 방지하고, 나아가 넘어짐에 따른 스로틀 튜브의 파손을 방지하는 스토퍼로도 기능한다.
■너클가드는 부드럽고 유연한 PU수지 사용.
정면에서 오는 충격을 완화하여 가드 본체의 파손을 방지하시오.
■레이저 프린트로 로고 마크가 찍힌 프론트 플레이트의 탈착으로, 두 가지 디자인을 선택 가능.
■ 탈착 가능한 폴리카보네이트 프로텍터 표준 장비.
■ ZETA XC 프로텍터 시리즈 장착 가능. 폭넓은 스타일링을 즐길 수 있다.
[장착 가능 보호대]
·ZETA X3 프로텍터
·ZETA X2 프로텍터
·ZETA XC 프로텍터
·ZETA XC-PRO 프로텍터
[소닉 손가드 고르는 법]
〈유니버설 타입 ZS72-2000/ZE72-2100〉
바엔드 플러그를 분리하여 중공 차량에 장착 가능.
● HONDA 차량
반달단 모양의 이너 웨이트가 장착부에 있는 경우, 이너 웨이트를 분리하여 중공이 되면 설치 가능.
● SUZUKI 차
이너 웨이트가 있으면 분리하고, 중공이 되면 설치 가능.
〈M16/M8타입 ZS72-2001/ZS72-2101〉
바엔드 플러그를 분리하여 핸들 바엔드 부분을 확인하여 주십시오.
● YAMAHA 차
핸들바엔드가M16피치1.5mm가공된핸들바에장착가능.
●KAWASAKI 차
핸들바엔드에M8의너트가용접되어있는핸들바에장착가능.
Polycarbonate protectors are standard.
Stylish handguard with bar-end-mounted handguard polycarbonate (PC) protector as standard equipment.
Polycarbonate (PC), which is resistant to impact, UV rays, low and high temperatures, has a versatile, simple and stylish design that can be used in any style of bike.
Not only does it increase wind resistance, it also has the function of mitigating impact from the front.
Installation is as simple as fixing it to the handlebar end.
While not requiring the complexity of a conventional handguard, it is firmly secured with a high-strength aluminum alloy bar-end plug made by machining.
The protector can be removed for use, or a ZETA protector of another design can be attached, allowing the user to enjoy their preferred styling.
■By loosening the arm bolts, the angle can be adjusted steplessly up and down on the axis of the bar end.
■The dedicated spacer allows position adjustment from the center position by 5 degrees per level, 4 levels up and 4 levels down, for a total of 9 levels.
Easily adapted to your preferred styling.
■The groove in the bar end plug allows the arm position to be adjusted to two positions.
It prevents the body from falling off and also functions as a stopper to prevent damage to the throttle tube due to tipping.
■Knuckle guards are made of soft and supple PU resin.
Mitigates impact from the front and prevents damage to the guard body.
■Two design options are available by attaching and detaching the front plate with laser-printed logo mark.
■Removable polycarbonate protectors are standard.
■ZETA XC Protector series can be attached.A wide range of styling can be enjoyed.
[Protector can be installed]
・ZETA X3 Protector
・ZETA X2 Protector
・ZETA XC Protector
・ZETA XC-PRO Protector
[How to choose a sonic handguard]
Universal type ZS72-2000 / ZE72-2100
It can be installed on bikes with bar end plugs removed and hollowed out.
●HONDA Bikes
If the mounting section has a half-moon stepped inner weight, it can be mounted if the inner weight is removed and the section is hollow.
●SUZUKI Bikes
Inner weights can be removed if present and attached if hollow.
[Representative Models]
CT125, GB350/S, CB400 SUPER FOUR, CB1100/RS/EX, CB1300 SUPER FOUR, V-STROM 250
Remove the bar end plugs and check the handlebar ends.
●YAMAHA Bikes
It can be installed on handlebars with handlebar ends machined with M16 pitch 1.5mm.
●KAWASAKI Bikes
It can be installed on handlebars with M8 nuts welded to the handlebar ends.