[세트 내용]
테크 타일 : 42매
에지: 26 장
코너 : 4개
[세트사이즈] 2080mmX2410mm
[단품사이즈]
· 테크타일 : 330mmX330mmX13mm
·엣지 : 330mmX50mm
코너:50mmX50mm
[무게(단품)]
· 테크 타일 : 약 490g
·엣지 : 약 55g
·코너 : 약 10g
·잠금 : 약 1g
[사양]
·내회전 하중: 80000파운드 (약 36톤)
·내압:3120psi219kgf/cm2
·내온도성: -30도에서 120도
·방염 수준 : 일본 소방법의 방염 물품 '인정제품' 방염 성능 시험 클리어
·내성: 내충격성, 자외선 방지, 산화 방지, 내가정용 화학약품, 내석유 제품 (변색가능성 있음)
· 사용 환경 : 실내
*화상에는 다른 염색·타입이 포함되어 있는 경우가 있습니다.
* 테크 타일 단품의 사이즈는 연결돌기부를 포함하지 않는 값입니다.
* 세트상품은 필요분의 잠금을 미리 가장자리에 장착하고 출하합니다.
*잠금만 판매하지는 않으니, 미리 양해 부탁드립니다.
* 연결시 잠금부분이 맞물려있지 않으면, 제대로 연결이 되지 않아 틈새가 벌어지므로, 바르게 연결하여 주십시오.
*가공내용은 예시로 기재되어 있는 것이며, 가공 자체를 추천하는 것은 아닙니다. 가공되는 경우는 어디까지나 사용자 자신의 판단과 책임 하에 실시되어 주십시오.
* 적합하지 않은 설치 장소
·경사, 단차, 요철, 자갈밭, 모래밭, 잔디, 목초지 등은 테크 타일을 깔 바닥에 적합하지 않습니다.
· 적합하지 않은 장소에 설치 사용했을 경우, 테크 타일이 분리되거나 깨질 수 있습니다.
·이곳에서의 설치 이용은 삼가주세요.
· 차고 출입구 부분에 경사가 있어, 출입시 텍타일이 분리될 수 있습니다.
· 테크 타일끼리 수열분을 접착함으로써, 잘 빠지지 않는 경우가 있습니다.
·폴리프로필렌을 접착할 수 있는 접착제를 사용하십시오.
* 접착시공이나 가공은 고객님 자신의 판단에 따라 실시하시기 바랍니다. 옥상이나 베란다에서 사용하시는 경우 바람에 날리지 않도록 하십시오.
* 재질특성
· 테크타일은 폴리프로필렌 수지를 주원료로 하며, 재질 특성에 준한 열팽창이나 냉수축, 휨 등이 발생할 수 있습니다.
·특히 햇빛이 비치는 장소 (열이 가해지는 장소) 설치면적이 넓은 경우에는 바닥1면에 테크타일을 깔지 말고 2분할이나 3분할 등의 여러개로 분할하여 벽이나 분할한 타일끼리의 투명런스를 충분히 설치하여 시공하십시오.
* 흠집 있음에 대하여
· 테크 타일은 원래의 바닥 보호나, 차고, 플로어, 공간 연출을 목적으로 한 합성 수지 제품입니다.
합성수지제품이므로 사이드스탠드, 센터스탠드, 차고작기, 공작기계 등의 접지로 테크타일 자체는 흠집이 나지만, 원래의 바닥은 확실히 보호됩니다. * 단 극도의 하중이 가해진 경우에는 그러하지 않습니다.
· 상처가 걱정되는 경우, 시판되고 있는 사이드 스탠드 패드나 고무 시트 등을 함께 사용하는 것이 좋습니다.
* 어긋남에 대하여
·차량을 출입시킬 때 가속이나 핸들 조작으로 테크 타일이 어긋나는 경우가 있습니다.
·천천히 (크립 현상 정도) 드나들도록 하세요.
·설치하는 바닥 (츠치마) 와 테크 타일 사이에는 마찰 저항이 필요합니다.
·마찰저항이 낮은 바닥에 설치한 경우, 차량의 이동이나 핸들을 꺾는 것만으로, 타일이 어긋나거나 분리될 가능성이 있으므로, 바닥과 테크타일 사이에 얇은 고무시트 등을 깔아, 어긋남이나 빠짐을 줄일 수 있습니다.
* 조합과 분리
테크타일은, 차고 뿐만 아니라 이벤트나 전시회등에서의 사용도 고려하여, 조합과 탈부착을 간단하게 할 수 있도록 만들어졌습니다.
· 조합의 딱딱함이 너무 딱딱하면, 좀처럼 조합할 수 없고, 분리하는 것도 매우 힘들어서 설치나 분리하는 데 시간이 걸립니다.
· 테크타일은 적당한 경도로 원활한 설치와 탈부착이 가능합니다. 동영상을 확인해 주십시오.
*메이커의 사정에 의해 상품의 사양변경이 있을 수 있습니다. 양해바랍니다.
[Set components]
TECH TILE:.42 sheets
Edge: 26 sheets
Corner: (1)4 pieces
Set size] 2080mm x 2410mm
Single size
Tech Tile330mm x 330mm x 13mm
Edge: 1.330mm x 50mm
Corner:.50mm x 50mm
Weight (single item)
Tech TileApprox. 490g
Edge: 1.Approx. 55g
Corner:.Approx. 10g
・Lock: Approx. 1g
[Specification]
Rotational load capacity80000 pounds (about 36 tons)
Pressure resistance3120psi 219kgf/cm2.
Temperature resistance-30 to 120 degrees
Flame retardant levelFlameproof goods "certified product" under the Japanese Fire Service Law, and passed fire retardant performance tests.
ResistanceImpact resistant, UV resistant, oxidation resistant, household chemical resistant, petroleum oil resistant products (discoloration may occur)
・Usage environment: indoor (court, pool, etc.)
*Images may contain other colors and types.
*Size of single TEC Tile does not include connecting protrusions.
*In set products, the necessary amount of locks are pre-installed on the edges for shipment.
Please note that we do not sell locks only.
*If the locking parts are not engaged when connecting, the connection will not be tight and a gap will be left, so please make sure the connection is correct.
The processing details are provided as an example only and are not recommended.Any modifications should be done at the user's own discretion and responsibility.
*Unsuitable installation location
Slopes, steps, unevenness, gravel areas, sandy areas, lawns, and pastures are not suitable as floors for laying TechTile.
If installed and used in an unsuitable location, the TechTile may come off or crack.
Please refrain from using the installation in these locations.
The garage entrance/exit area is sloped, and the tech tiles can come off when entering and exiting the garage.
Gluing several rows of TEC tiles together may make it more difficult for them to come off.
Use an adhesive capable of bonding polypropylene.
*Adhesive installation and processing should be performed at the customer's own discretion.When using the product on a rooftop or balcony, make sure that it will not be blown away by the wind.
*Material Characteristics
TEC-TILE is mainly made of polypropylene resin, which may cause thermal expansion, cold shrinkage, and warpage in accordance with the material properties.
When installing TEC Tiles in areas that are particularly exposed to sunlight (where heat is applied) or where the installation area is large, do not lay TEC Tiles on a single floor, but divide the floor into two or three sections, and provide sufficient clearance between walls and divided tiles.
*About Scratched
TecTile is a synthetic resin product designed to protect the original floor or to create a garage, floor, or space.
The original floor is well protected, although the TechTile itself will be scratched by grounding from sidestands, center stands, garage jacks, machine tools, and the like.*However, this does not apply when extreme loads are applied.
If you are concerned about scratches, we recommend using commercially available side stand pads or rubber sheets together.
*About the displacement
When entering or exiting a vehicle, the tech tile may shift due to acceleration or steering wheel operation.
Please make sure to enter and exit slowly (about a creeping phenomenon).
The floor (earthen floor) to be installed and the tech tile must have frictional resistance between them.
When installed on a floor with low frictional resistance, the tiles may shift or come off simply by moving the vehicle or turning the steering wheel. A thin rubber sheet or similar material can be placed between the floor and the tech tile to reduce shifting or coming off.
*Combination and removal
Tek-Tek tiles are made to be easily combined and removed for use not only in garages, but also at events and exhibitions.
If the combination is too hard, it is not easy to combine and very difficult to remove, making installation and removal time consuming.
Tek-Tek tiles are moderately hard for smooth installation and removal.Please check the video.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.