제조사 보증기간 : 없음 (초기 불량만)
설치 시간:0.2H
사이즈 (약) : Φ 94mm
조절 기구 (약) : 10 단계 (18° 간격)
[비고]
▼ HONDA / Kawasaki / SUZUKI 미러 부착부가 좌우 정나사 차량은 그대로 장착 할 수 있습니다.
▼ YAMAHA 미러 장착부가 좌우 어느 쪽인가 역나사인 차량은, 반드시 순정 어댑터를 사용하십시오.
[상품 내용]
본체 (2개 세트) · 10mm 정나사 X 2개 · 10mm 역나사 X 1개 · 8mm 정나사 X 2개 · 8mm 역나사 X 1개
*설치 방법에 주의해 주십시오.
* 반드시 정품 어댑터를 사용하세요.
*밀러의 보안 기준이 개정되어 2005년 1월 이후에 형식 승격된 신형 차 및 2007년 1월 이후 출시되는 지속 생산 차량에 새 기준이 적용되고 있습니다.
*설치시간은 오토바이에 관한 정비의 일반적인 지식 및 기능을 갖춘 국가자격증을 갖춘 정비사분이며, 필요한 공구를 이미 가지고 계신분을 전제로 하고 있습니다. 또한 설치시간에 대한 참고이므로 공임등의 기준이 되지 않습니다.
*적합확인 차종에 기재되어 있는 차종 이외의 장착확인은 하고 있지 않습니다. 기재되지 않은 차종은 장착불가 또는 미확인 상태입니다.
* 적합확인 차종에 기재가 없는 차종에 설치는 제조사 보증하지 않습니다.
*화상에는 다른 색깔이 포함되어 있는 경우가 있습니다.
*메이커의 사정에 의해 상품의 사양변경이 있을 수 있습니다. 양해바랍니다.
None (only initial defect)
Installation time:0.2h
Size (approx): Φ94mm
Adjuster mechanism (approx.): 10 steps (18° intervals)
[remarks]
Honda / Kawasaki / Suzuki mirrors can be installed without modification.
▼ For bikes with YAMAHA mirror mounting points on either the left or right side with right handed thread, be sure to use the stock adapter.
[Product Description]
Main unit (set of 2), 2 x 10mm right-handed screws, 1 x 10mm left-handed screw, 2 x 8mm right-handed screws, 1 x 8mm left-handed screw
*Please note the installation instructions.
*Always use the stock adapter.
Also, this is a reference for installation time and is not a guide for labor charges.
*The installation of models is not checked other than those listed in the compatibility check list.If your vehicle is not listed, it cannot be installed or has not been tested.
*The image may contain other colors.
*There may be changes in product specifications due to the manufacturer's reasons.