[ROAD 시리즈의 특징]
어떠한 작동 상황 (고온에서 저온까지) 에도 안정된 높은 마찰 계수와 내마모성이 있는 것이 특징으로, 뛰어난 내구성을 가능하게 합니다.
■CC컴파운드
바깥 공기 온도가 낮든 높든, 날씨가 비든 건조하든 모든 상황에서 뛰어난 성능을 발휘할 수 있는 것이 특징입니다.
절대적인 제동력은 높지 않지만 전천후 형태로 통제력이 높은 컴파운드입니다
통제력을 중시하거나 가성비를 중시하는 사람들에게 추천합니다
[안전 제동의 비결은, 브레이크 패드]
브레이크 업계의 글로벌 선두주자인 브렘보는 브레이크 시스템의 안전성을 향상시키기 위해 첨단 기술을 채택한 고성능 브레이크 패드를 풍부하게 라인업하고 있습니다
'신타드에서 카본 세라믹에 이르기까지 다양한 컴파운드를 사용한 풍부한 라인업을 제공함으로써 브렘보는 경주, 로드, 오프로드, 스트리트, 스쿠터 등 모든 장르의 요구를 충족시킬 수 있습니다'
브레이크 패드에 일반적으로 사용되는 컴파운드는 신타드 메탈과 유기농 계통으로 나눌 수 있습니다
어느 콤파운드를 선택할지는 사용 목적으로만 결정되는 것은 아닙니다.
다른 컴파운드의 브레이크 패드를 같은 용도로 사용할 수도 있습니다
■신타드 : SA, LA, SP, SX, SD, XS, GENUINE
윤활제, 연마제 등을 혼합한 금속 가루를 고온에서 압축하여 생성된 컴파운드
생산 과정에서 접착제를 첨가하지 않고 모든 형태의 백플레이트에 결합됩니다
금속 가루의 성능이 고온에서 브레이킹 파워를 결정짓는 요소입니다
윤활제는 브레이킹 전체를 안정시키는 데 도움이 되며, 연마제는 브레이크 디스크를 깨끗하게 유지하는 데 도움이 됩니다
■ 카본 세라믹 : RC, CC, TT, GENUINE
'주로 수지 점결제, 금속 가루, 윤활제, 연마제로 구성되어 있습니다'
마찰 계수는 수지 점결제와 금속 가루에 의해 결정되며 윤활제와 연마제는 위와 같은 기능을 수행합니다
■ 콤파운드의 선택
모든 브레이크 패드는 특유의 사용 용도를 가지고 있습니다. 컴파운드 선택은 브레이크 패드가 대처하는 다양한 상황에 따라 결정됩니다.
경주용 브레이크는 고온에서 최고 성능을 발휘해야 하며, 거리용으로는 중저온에서 브레이크를 밟을 때 높은 안정성을 발휘해야 합니다
■지자
브레이크 패드의 초기 길들이다, 이른바 '아타리 붙이기' 그것은 모든 컴파운드에 특히 중요한 과정이며 경주용 RC 컴파운드는 모든 컴파운드에 특히 중요합니다
손잡이 간격을 두고 가볍게 여러 번 브레이크를 밟으면 브레이크 패드 부착이 완료됩니다.
이때 억지로 온도를 높이는 브레이킹은 하지 마십시오.
이것들은 브레이크 시스템의 충분한 성능을 발휘하는 데 필요한 올바른 가열 및 냉각 사이클을 생성합니다
아타리 붙이기 시간은 컴파운드의 종류에 따라 결정됩니다만, 일반적으로 신타드 메탈계보다 유기농계 쪽이 길어집니다.
[Features ROAD series]
It is characterized by a high coefficient of friction and wear resistance that is stable under any operating conditions (from high to low temperatures), enabling excellent durability.
■CC Compound
It is characterized by excellent performance in all conditions, whether the outside temperature is low or high, and whether the weather is rain or dry.
Although the absolute braking power is not high, the compound is all-weather and controllable.
Recommended for those who want to emphasize control and cost-effectiveness.
[The secret to safe braking is brake pads]
Brembo, the global leader in the brake industry, offers a wide range of high-performance brake pads that employ advanced technologies to improve the safety of braking systems.
By offering a wide range of compounds, from sintered to carbon ceramic, Brembo is able to meet the needs of all disciplines: racing, road, off-road, street and scooter.
The compounds normally used for brake pads can be classified into two systems: sintered metal and organic.
The choice of which compound to use is not solely determined by the intended use.
Different compounds of brake pads can be used for the same application.
■Sintered: SA, LA, SP, SX, SD, XS, GENUINE
A compound produced by compressing metal powder mixed with a lubricant or abrasive at high temperature.
It can be bonded to back plates of any shape without the addition of adhesives in the production process.
The performance of the metal powder is the decisive factor for braking power at high temperatures.
Lubricants help to stabilize the entire braking process and abrasives keep the brake discs clean.
■Carbon Ceramics: RC, CC, TT, GENUINE
It is mainly composed of resin binder, metal powder, lubricant, and abrasive.
The coefficient of friction is determined by the resin binder and metal powder, and the lubricant and abrasive perform the above functions.
■Selection of compound
Every brake pad has its own specific application.The choice of compound depends on the various situations that the brake pads will be dealing with.
For racing use, the brakes must perform at their best at high temperatures, while for street use, the brakes must be highly stable when applied at medium to low temperatures.
■Bite
To check the Initial fitting of brake pad is a particularly important process for all compounds, and is particularly important for racing RC compounds.
Apply the brakes lightly several times with a short interval between the application of the brakes to complete the fitting of the brake pads.
At this time, do not try to force the temperature up by braking.
These generate the correct heating and cooling cycles necessary for the brake system to perform satisfactorily.
The bite time depends on the type of compound, but it is generally longer for organic compounds than for sintered metal compounds.