10인치 일반 스텝용 디스크 브레이크 키트입니다.
노멀 스텝용은 정상적 단계, 리어 브레이크 페달을 그대로 사용하여, 리어 디스크화가 가능하게 됩니다.
대용량 댐퍼 내장 휠 허브의 채용함으로써 구동 시, 백 토오크 시에 필요한 부담을 대폭 경감합니다.
■ 댐퍼 부착 휠 허브
휠 허브 내장 댐퍼의, 가속, 감속시에 휠 허브에 걸린 토오크, 변속 때의 충격을 흡수하여 엔진, 클러치, 미션에 가는 부담을 경감할 수 있습니다.
또, 엔진 커스텀에 의한 고출력화된 엔진에 발생되어 다대한 백 토오크를 댐퍼가 경감합니다.
리어 브레이크의 성능도 디스크 제동화하기로 향상하고 뛰어난 제동력을 발휘합니다.
■ 디스크 로터 허브와 댐퍼 허브에 다이캐스팅 알루미늄 사용
다이 캐스트 알루미늄제를 채용하는 것으로, 강도와 강성을 높이겠다고 함께 경량화 구현!!
표면에 배럴 연마를 함으로 드레스 업 효과와 휠 주위를 아름답게 표현합니다.
■Φ150 스테인리스제 리어 디스크 로터
녹으로 강한 내구성이 뛰어난 스테인레스 강을 채용.
■대용량 댐퍼 고무 사용
오리지널 대용량 댐퍼러버를 채택하여 구동시, 백 토크시 가해지는 부담을 대폭 경감시킵니다.
또한 소모가 적은 내구성이 뛰어난 댐퍼러버를 채택했습니다.
■ 플로팅 마운트식 캘리퍼 브래킷
토오크 로트의 프레임과 캘리퍼 브래킷을 고정하고, 플로팅 상태에 하는 타입이고 제동 시 발생하는 킥백 및 깡충 뛰기 등을 감소시킵니다.
[설치 조건]
10인치 차 (또는 SP우촨 사제 12인치 휠 자동차) 그래서 12cm, 또는 16cm롱 스윙 팔을 장착하고 있는 차량
대상 클러치 커버
노멀, 또는 SP 타케가와사의 다이캐스팅 클러치 커버/스페셜 클러치 커버 TYPE-R/건식 클러치 커버 TYPE-R/17건식 클러치 커버 TYPE-R
SP 타케가와 사의 모래형 주조 스페셜 클러치 커버, 모래형 주조 건식 클러치 커버 장착 차량, 프라이머리식 킥스타터 엔진 장착 차량에는 장착할 수 없습니다.
Disc brake kit for 10 inches stock step.
For stock step, it is possible to use the stock step and rear brake pedal as it is, and to use the rear disc.
The use of a wheel hub with a built-in large-capacity damper greatly reduces the load applied during drive and back torque.
■Wheel hub with damper
The damper with a built-in wheel hub absorbs the torque applied to the wheel hub during acceleration and deceleration and the impact during gear shifting, reducing the load on the engine, clutch and transmission.
In addition, the damper reduces the large amount of back-torque generated by the engine that has been customized for higher output.
The rear brake performance is also improved by using disc brakes, which provide excellent braking power.
■Disc rotor hub and damper hub made of die-cast aluminum
Die-cast aluminum is used to increase strength and rigidity while reducing weight!!!
Barrel polishing on the surface enhances the dress-up effect and creates a beautiful look around the wheel.
■Φ150 stainless steel rear disc rotors
Stainless steel is used for its high durability and resistance to rust.
■Large-capacity damper rubber is used
The original high-capacity damper rubber greatly reduces the load on the drive and back torque.
In addition, the damper rubber is highly durable and wear-resistant.
■Floating mount caliper bracket
The caliper bracket is fixed to the frame by a torque slot and floats to reduce kickback and hopping that may occur during braking.
[installation requirements]
10 inches bikes (or SP Takegawa 12-inch wheels) with 12cm or 16cm long swingarm
Target clutch cover
Stock, or SP Takegawa die-cast clutch cover/Special clutch cover TYPE-R/Dry clutch cover TYPE-R/17 dry clutch cover TYPE-R
Cannot be installed on bikes equipped with SP Takegawa's sand casting special clutch cover, sand casting dry clutch cover, or primary type kick starter engine.