Leather Pros 사의 레트로 시리즈 가방은 시장에서 최고의 T-스포츠 백으로 평가받고 있습니다
'뛰어난 재료, 간단하면서도 견고한 마운트 시스템, 그리고 버거라이더를 질투하게 할 정도의 확장성이 있습니다'
'가방이 차체에 밀착되어 날씬해 보이고, 그럼에도 넉넉한 용량을 갖추고 있습니다'
[소재]
나일론 : 1050 Denier Ballistic Nylon으로 업그레이드. 강인성, 내마모성 외에도 내열성이 뛰어난 특허받은 특별한 배합물로 구성된 튼튼한 미국제 천을 사용합니다.
가죽 : Jacketweight leather를 사용한 풀레더 버전입니다.
리드 (뚜껑) : 모양을 유지하기 위해 10온스의 두꺼운 가죽 두겹으로 구성되어 있습니다
[설치 간단(퀵 릴리즈)]
허가된 마운트 시스템은 공구를 사용하지 않고 쉽게 제거할 수 있습니다
[보안]
일체형 잠금장치가 있어 차체에 가방을 잠글 수 있습니다
[내열성]
정품 배기 시스템에 맞게 만들어졌지만 외부 제품에도 적합하도록 이중층 방열판을 가방에 추가했습니다
Bassani Road Rage 등의 Upswept 2 in 1 엑조스트와 같은 보다 내열성이 요구되는 엑조스트에도 대응합니다.
그러나 배기가스를 가방 전면 하부에 분사시키기 위해서는 배기가스를 주입하기 위해 이그제큐멘터리와의 매칭은 TBR 또는 유사한 파이프입니다
따라서 별도의 차폐 장치가 필요할 수도 있습니다
턴 시그널은 펜더 스트럿에서 옮겨야 합니다
옆면에 번호판이 있으면 똑같이 재배치해야 합니다
설치용 하드웨어는 모두 포함되어 있으며, 디터처블 백레스트를 사용할 수 있습니다.
Leather Pros' Retro Series bags are rated the best T-Sport bags on the market.
It has excellent materials, a simple but sturdy mounting system, and enough expandability to make bagger riders jealous.
The bag is slim and fits closely to the body of the bike, yet it has enough space for all your needs.
[Material]
Nylon: Upgrade to 1050 Denier Ballistic Nylon.The rugged American-made cloth is composed of a special patented formula that is tough, abrasion resistant, and heat resistant.
Leather: This is a full leather version using jacket weight leather.
Lid: It is constructed by two layers of thick 10 oz. leather to maintain its shape.
[Easy to install (quick release)]
The approved mounting system can be easily removed without the use of tools.
[Security]
An integrated lock is provided to lock the back to the bike body.
[Heat resistance]
It is made to fit the stock exhaust system, but a double layer heat shield is added to the bag to fit the aftermarket one as well.
It is also suitable for exhausts that require higher heat resistance, such as the Upswept 2 in 1 exhaust of the Bassani Road Rage.
However, care must be taken to match the exhaust.A TBR or similar pipe blows exhaust gases into the lower front part of the bag.
Therefore, additional shielding may be required.
Turn signals must be relocated from the fender struts.
If the license plate is mounted on the side, it must be repositioned as well.
All mounting hardware is included and a detachable backrest can be used.