- 오토바이 부품
- 핸들 & 컨트롤부품
- 컨트롤
- 스티어링 댐퍼
- NHK
- NHK - 스티어링 댐퍼
- 상품 목록
- 스티어링 댐퍼 키트
스티어링 댐퍼 키트
Product # 20-14-483
237,075.32 KRW (26,450 엔)
List price: 237,075.32 KRW Save 0%
+265 Webike point (2,375.23 KRW)
이 상품은 생산이 중단되었습니다. |
Product # 20-14-483
237,075.32 KRW (26,450 엔)
List price: 237,075.32 KRW Save 0%
+265 Webike point (2,375.23 KRW)
이 상품은 생산이 중단되었습니다. |
Model Page Links
"It was equipped to TZR125 (3TY). Stability is increased after wearing and handling was settled. Influence comes out in a motion which merely turns the wheel greatly a little. (situation which turns right and left from an erecting state) However, there is little influence and sense of incongruity for such a motion unless I do quick strangely. Composure by a straight line is also good. I think that it can become fortunate if direction called touring is equipped with a speed region distant to winding by lightweight motorcycle. As for attachment, it would be hard, without a stroke being lacking unless it prepares a principle. First of all, since the photograph or picture of an attached instruction manual are not helpful, it is difficult. I think that it was more simply attached when the photograph was clear. However, there is no extraordinarily difficult work, and if you care about the bolting torque of a damper holder, it will be attached satisfactory."View Detail
I bought this to install on my Kawasaki Z125 pro. There's no suitable bracket for this bike so, I need to customize it. Stability was immediately noticed once installed. For such a small bike, I need to adjust to the maximum at top speed. Overall, this is a very good damper.View Detail
It could be installed without removing the Tank. The work took about 90 minutes including adjustment.
It is hard to tell in city driving, but it can certainly be felt at high speeds.
I think in my case, it's mostly about looks lol.
My concern is that the stroked area will have oil residue.
When I inquired about it, the reply was that if I stroked it a few times, the oil seepage would disappear. 。 We are just taking a look at the situation.View Detail
well packed in the box during delivery,always never failed in the quality.fits well and looks good. stability in controlling the steering.View Detail
[How is it used?
Since I do a lot of touring on highways, I decided to install a steering damper to improve high speed stability. The product is FZ400. (4YR) It is for the FZS600, but it can also be used with the FZS600 without any problem.
Was the one you received as per Image?
The color of the DamperBody is Gold, which is like an OHLINS color. It's not a color that I don't like, but I would have preferred the ODM-2000 Series Gun meta color to match the body color, but I'm a little disappointed that I can't choose the color.
Was the installation difficult?
I adjusted the position of the bracket on the front fork side to be 40mm above the trifecta (the instruction manual specifies 51mm). Also, the pillow ball joint between the bracket on the damper body and the bracket on the frame side moves too much and makes a pushing noise when the damper body moves up and down. So, I inserted an O-Ring of an appropriate size into the pillow ball part to suppress the movement of the DamperBody. I also applied screw lock fluid to all the bolts used for installation and fixed them in place.
How was your experience with it?
Originally, I installed the Steering Damper for stability at high speed straight ahead, but I didn't expect that it would stabilize my posture while cornering and make cornering easier.
There are 7 levels of damper switching, but even with the 7th level, which is the heaviest, I didn't feel any inconvenience even when driving in the city. I usually use the 6th gear.
Initially I was going to use ODM-2000 in Gun meta color, but I changed Handlebar to Quantity:Pair (for Left and Right) I measured the amount of movement (Strokes) when cutting to 125mm in advance, so the Strokes were 125mm.:I decided that I might not be able to use the 120mm ODM-2000, so I purchased the Stroke 130mm ODM-3000. When I actually installed it on the car body, I found that if I devised a way to install it, it would be possible to use the Stroke:I felt like I could use Limit even with the 120mm ODM-2000.
[Included Parts:were they on?
All the necessary parts for installation are included.
[Was there anything that disappointed you?
It would be nice to have a choice of several colors for the damper body, and it's a little disappointing that when the damper is mounted on the car body, more than half of it is obscured by the Inner cover of the Upper Cowl.
Other items that would be helpful
Point and hang/notes for installation:It is better to install it on the car body in a temporary state to check the position of each bracket and make sure there is no problem with the movement of the Handlebar before tightening the Bolt.
Items to buy together:I think it is safer to use a low-strength screw lock fluid to secure the Bolt.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
장바구니에 담기 전에 옵션을 선택하십시오.
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송
* 더 좋은 그리고 반드시 일본 부품을 찾을 수 있는 스토어.
* 지금 등록하기 면어메이징 딜 및 특가 제공!
* 800,000이상의 상품 목록. 부품 찾기가 어렵지 않습니다.
축하합니다! 고객님의 새 계정이 성공적으로 만들어졌습니다! 이제 회원 특권을 이용하여 온라인 쇼핑 경험이 가능합니다. 온라인 상점의 운영에 대해 궁금한 점이 있으면 Webike에게 이메일을 보내 주십시오.
제공된 이메일 주소로 확인 메시지가 전송되었습니다. 네가 만약 한 시간 내에 메일을 받지 못하면, 부탁드립니다 문의하기.