○ 인테크 포트 지름 Φ 26?대응
○ 메인 제트#150조종사 제트#15삽입이 끝난
● 키타코 사제 ULTRA-SE실린더 헤드 대응
[키트 내용]
VM 26-671X카브레터 ASSYX1
매니폴드 세트 X1
버튼 캡볼트 6X15X2
매니폴드 보디 X1
매니폴드 패킹 X1
스테인리스 밴드 (Φ 32?50) X2
고무 고리 X1
메인 제트 (미쿠니 육각형/ 크다) #130X1
주의:엔진의 사양이나 주행 환경에 따라서 제트류의 세팅이 필요합니다. 키타코빗크캬브킷토은 모두 기화기 업체 정품을 채용하고 있기 때문에, 세팅에 대해서는 반드시 정품을 사용하여 주십시요. 정품 이외를 사용하면, 올바른 세팅이 나오지 않고, 트러블의 원인이 됩니다.
*노멀 에어 클리너 사용 불가.
○Intake port diameter Φ26
○Main jet #150 Pilot jet #15 Assembled
●Compatible with Kitaco's ULTRA-SE Cylinder Head
[Kit Contents]
VM 26-671x Carburetor assembly x 1
Manifold Set x 1
Button Cap Bolt 6 x 15 x 2
Manifold Body x 1
Manifold Packing x 1
Stainless Steel Band (Φ32 - 50) x 2
Rubber Holder x 1
Main Jet (Mikuni Hexagonal Type/Large) #130 x 1
Note: It is necessary to set up the jets according to the specification of the engine and the driving environment.The Kitaco Big Carburetor Kit uses the stock kit from the carburetor manufacturer, so please be sure to use the stock kit for setting.If you use other than the stock one, the correct setting will not be obtained and it may cause trouble.
*Stock air cleaner cannot be used.