브레이크 피팅 어댑터
Product # 14592933
9,809.32 KRW (1,100 엔)
List price: 10,255.19 KRW Save 4%
+11 Webike point (98.09 KRW)
주문이 완료되면 제조업체의 재고를 확인하고 확인된 배송 시간을 이메일로 보내드리겠습니다.
Product # 14592933
9,809.32 KRW (1,100 엔)
List price: 10,255.19 KRW Save 4%
+11 Webike point (98.09 KRW)
Earls remaining and combined with Fitting, but I can not fix it until the end Fitting can not be fixed.
Loupe expanded Large and it seems that Screw has not been cut to the end and the rest 1 / Screw is not cut in 3 laps.
With this I can not screw up to the end.
The last one / I shuffled Screw for 3 laps and finally it became possible to screw it to the end.
View Detail
Although other Manufacturers may be the same one, if it does not bind tight and carry out, pressing [ a root does not have a screw thread by the side of a Caliper and ] down a Packing since the root part is thin, a Packing will shift from the center.Although I think that there are no worries about
Fluid leak, it is whether appearance is a little worrisome?View Detail
I bought this to install a NISSIN 4POTCaliper around NSR250R (MC21) on my Kawasaki Zr-7S.
If I am going to go to the trouble of changing the hose, I wanted to make the Brake hose simple and parenthesis-friendly, so I was considering various options.
When the Brake Caliper was temporarily attached, it was found that the banjo position faces almost straight up.
To begin with, I looked on the Net to see what the handling of the NSR250ROEM was like, and it seemed to have a Banjo angle of almost 90-degrees.
I considered a similar arrangement, but it seems like the load would build up at the 90-degrees bend…… or something like that.
I was thinking that if I were to attach a stainless banjo&banjo bolt, I would have to choose a stainless banjo&banjo bolt and it would be too heavy.
Suddenly, I looked at the motorcycle parked next to me in the parking lot and saw a Brake Caliper with a Brake hose installed by Straight and thought, COLLEDA!
When we looked into it, we found that the durability from Active is also relatively safe Material:A Stainless Steel Brake Fitting Adapter was available.
Since the Brake CaliperBody is undergoing overhaul, it is not yet ready for full-scale use, but the angle looks good as long as it is temporarily attached.
With this, the front brake area can be built simply and stylishly.
Definitely Material if you buy it as For Street.:Stainless Steel is a Recommendation.View Detail
The Hose was replaced along with it.
The Hose part was Red, so we installed Blue here.
The color is nice, but you have to be careful not to overtighten or lick the corners when tightening so that the color doesn't peel off.View Detail
I changed the brake hose from Earls to Goodridge along with the hose.
Originally, it was a conventional Hose color, but I don't like to stand out too much, so I chose Black and it was the right choice.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
장바구니에 담기 전에 옵션을 선택하십시오.
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송
* 더 좋은 그리고 반드시 일본 부품을 찾을 수 있는 스토어.
* 지금 등록하기 면어메이징 딜 및 특가 제공!
* 800,000이상의 상품 목록. 부품 찾기가 어렵지 않습니다.
축하합니다! 고객님의 새 계정이 성공적으로 만들어졌습니다! 이제 회원 특권을 이용하여 온라인 쇼핑 경험이 가능합니다. 온라인 상점의 운영에 대해 궁금한 점이 있으면 Webike에게 이메일을 보내 주십시오.
제공된 이메일 주소로 확인 메시지가 전송되었습니다. 네가 만약 한 시간 내에 메일을 받지 못하면, 부탁드립니다 문의하기.