■ 표준품보다 링크 판 판자를 두텁게 하는 것으로 강도를 약 1.2-1.3배로 업 (SP무카와 대비) . 또한 SDH처리 및 솔리드 부시를 장비한 420시리즈 최고의 드라이브 체인입니다.
■ SDH처리
체인이 늘어나는 원인은 쫑긋 부시의 낡았어요. 모래와 먼지 등의 미세하고 굳은 경도의 유해 입자가 핀 부시 간에 혼입하여 체인의 마모를 촉진하고 진동이나 소음의 원인이 되었고, 체인의 수명을 단축시키게 됩니다. 이런 경우에 D.I.D사가 개발한 SDH처리가 위력을 발휘합니다. SDH처리는 핀 표면에 매우 딱딱한 피막을 형성한 것으로, 이 피막은 내부에 더욱 높은 경도의 탄화물을 분산한 형태로 되어 있습니다. 그래서, 외부에서 딱딱한 다른 입자가 핀 부시 간에 혼입해도 체인의 마모를 막습니다.
■ 솔리드 부시
이음매 없는 매끄러운 표면과 뛰어난 진원도를 가진 강성의 높은 솔리드 부시를 채용한 내 마모성이 뛰어난 롤러 체인입니다. 솔리드 부시는 링크 판를 압입할 때 생기는 부시의 통형 변형을 감소시키고, 핀 부시 간의 최적인 접촉 베어링 면을 형성합니다.
■The link plate is thicker than that of the standard product, which increases the strength by 1.2-1.3 times (compared with SP Takegawa).Moreover, it is the strongest drive chain of 420 series equipped with SDH treatment and solid bushings.
■SDH processing
Chain stretching is caused by worn pins and bushings.The presence of fine, hard, harmful particles such as sand and dust between the pins and bushings accelerates chain wear, causes vibration and noise, and shortens the life of the chain.In such a case, SDH processing developed by D.I.D. is very effective.The SDH treatment forms a very hard film on the surface of the pin, and this film is in the form of a dispersion of carbides with even higher hardness inside.This prevents wear of the chain even if hard foreign particles are mixed in between the pin and the bushing from the outside.
■Solid bushings
This is a roller chain with excellent abrasion resistance that uses a highly rigid solid bushing with a smooth, seamless surface and excellent roundness.The solid bushing reduces the barrel deformation of the bushing that occurs when it is press-fitted into the link plate and forms an optimum contact bearing surface between the pin and the bushing.