이그조스트 조인트 개스킷
Product # D31-41-410
12,209.63 KRW (1,371 엔)
List price: 12,209.63 KRW Save 0%
+14 Webike point (124.67 KRW)
이 상품은 생산이 중단되었습니다. |
Product # D31-41-410
12,209.63 KRW (1,371 엔)
List price: 12,209.63 KRW Save 0%
+14 Webike point (124.67 KRW)
이 상품은 생산이 중단되었습니다. |
Model Page Links
Fits: HONDA XR250 95-07, HONDA XR250 Baja 95-07, HONDA XR250 Motard 95-07, HONDA XR400 Motard 05-08
I bought this product because my XR250MOTARD was leaking gas from the joint gasket and it was bothering my neighbors. the KITACO product was cheaper, but I wanted to stop the leaking completely and it was highly rated, so I bought this one.
As an advise, you can apply grease to both the inside and outside of the joint gasket with a cheap oil-based product. This will make installation easier, increase efficiency, protect the gasket, and also seal the gasket against gas leaks as the grease will burn off with heat after installation.
The most common mistake is to modify or cut the gasket because it is difficult to fit. It depends on the material.
If you have a Slip-on Silencer, you can use a pliers tool to widen the Silencer side so that the joint gasket can fit. If it is a Slip-on Silencer, you can use Pliers etc. on the Silencer side to widen the joint gasket to fit.
Most of the time, the gasket doesn't fit well on the external silencer side, so the gasket is damaged by forcing it to fit.
The Gas leak stopped completely and I was very happy with Large.View Detail
Fits: YAMAHA WR250X 07-17, YAMAHA WR250R 07-17, HONDA CRF250 RALLY 17-20, YAMAHA YZ450F 17-21
Thank you, WEBIKE! I didn't think I would ever find the right part. This exhaust joint gasket fits the Delta Barrel 4 Exhaust. I didn't have a caliper to measure the exact fit of the exhaust joint and they smash after use. So I didn't know the actual size I needed. It was proving quite difficult. My exhaust wouldn't fit without it. I now have it am I'm very pleased with the product. Thanks again, WEBIKE.View Detail
Fits: KAWASAKI D Tracker 125 10-16, KAWASAKI KLX150 09-13, KAWASAKI KLX125 10-16
I bought it again because it was new and somehow it got into the back of the MiddlePipe.
I've bought JMCA Certified for places where I can't run without changing the exhaust system many times, but the quality is usually fine.View Detail
Fits: KAWASAKI KLX250 93-99, KAWASAKI KLX250ES 93-99, KAWASAKI KLX250SR 93-99, KAWASAKI D tracker 93-99
I installed it in the OEM joint of KLX250SR
The outer diameter was Exactly, but the inner diameter was too big and there was no space between the clamps no matter how much you tighten the clamps It felt like it was going to be empty, so I dealt with it by applying liquid Gas to it stiffly
It's a good thing that the tip of the pipe is plugged in, so it's a large and sturdy pipe without liquid gas It may be, but again, if you want to use it for this motorcycle, you need to use the Recommendation I can'tView Detail
Fits: KAWASAKI D Tracker 125 10-16, KAWASAKI KLX150 09-13, KAWASAKI KLX125 10-16
I bought it for when I removed and adjusted the Exhaust System in spring and adjusted it afterwards.
The product will be purchased for the third time.
There are BALI on the cut surface, but it is acceptable range.
I always find it useful.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
장바구니에 담기 전에 옵션을 선택하십시오.
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송
* 더 좋은 그리고 반드시 일본 부품을 찾을 수 있는 스토어.
* 지금 등록하기 면어메이징 딜 및 특가 제공!
* 800,000이상의 상품 목록. 부품 찾기가 어렵지 않습니다.
축하합니다! 고객님의 새 계정이 성공적으로 만들어졌습니다! 이제 회원 특권을 이용하여 온라인 쇼핑 경험이 가능합니다. 온라인 상점의 운영에 대해 궁금한 점이 있으면 Webike에게 이메일을 보내 주십시오.
제공된 이메일 주소로 확인 메시지가 전송되었습니다. 네가 만약 한 시간 내에 메일을 받지 못하면, 부탁드립니다 문의하기.