This exhaust feels well built and the good quality parts contribute to its' attractive looks. The downsides are that it only uses one attachment point for the bracket, and it vibrates at certain RPMs.
Made for 155bbk and almost as quiet as OEM. The quality and construction is very good and looks equal to more expensive exhausts, and the design appeard to be very durable. Initial assembly and fitting to the scooter takes 15-20 minutes because the bracket requires careful alignment and is difficlt to do by yourself. Overall this is a high quality product and would recomendView Detail
Made for 155bbk and almost as quiet as OEM. The quality and construction is very good and looks equal to more expensive exhausts, and the design appeard to be very durable. Initial assembly and fitting to the scooter takes 15-20 minutes because the bracket requires careful alignment and is difficlt to do by yourself. Overall this is a high quality product and would recomendView Detail
It is used for CYGNUS X2 model. As a CustomConcept, I had set my sights on the OEM look and it was almost love at first sight. I am very satisfied with the large size of this product, although it was a crowdsourced purchase. First of all, it looks almost the same as OEM. Without the KOSO stamp, even CYGNUS riders would not be able to tell the difference. On the other hand, the shape of the exhaust pipe is quite different, and the exhaust efficiency seems to be improved by the large diameter and straight structure. In fact, in the catalog specifications, it is stated that the exhaust system can handle up to 160cc of bore up, making it a high performance exhaust system. As for the sound, I feel that the buzzing sound is a bit louder than OEM, but the volume is almost the same and I don't think it leads to noise trouble. I am currently using a 160cc bore up with a high camshaft and a high-compression head, and I have no particular problems. There is one point that needs to be noted. The boss of the A/F sensor is M16, and the A/F sensor of Japanese specification is M12, so it does not fit. You will need to install an AFR sensor or a conversion adapter.View Detail
Compared to OEM, the performance is improved overall because of the bulkhead. The exhaust pipe and the exhaust side were covered with rust after a year and a half. Good performance for the price, but may need to be repainted before installation.View Detail
Since the Silencer and the Exhaust pipe part can be separated While leaving the Rear wheel, leave the O 2 Sensor attached It is also workable and has a thermal barrier like the OEMExhaust System Individualist Exhaust System. Performance is improved feeling of Normal muffler better, low performance performance as well A slightly falling degree and the sound is also a quiet class without problems (The sound quality is high and not bass oriented) The disadvantage is assembled and sent in the state of RoseRose, but it is not easy to assemble it so as not to scratch it I think it's a bit difficult.. Once assembled, desorption itself is easy, precision is also a good category for Made in Taiwan.View Detail
The shape is unusual for 125 Exhaust System and it is good in terms of differentiation from other cars of the same type Oil is also easy to put in Large durable handling. Strongly dissatisfied part is about sound, sound volume is quieter than other Exhaust System, but treble is conspicuous, those who buy with expectation of bass are caution needed.View Detail
I am very happy with these bars overall. The price is very good for an adjustable clip-on. The up/down angle is adjusted using unique a locking system with splines to make the adjustment precise and locks it in place. The foreward/backwards adjustment is achieved by simply rotating the bars and tightening, some markings would be appreciated to help determine the angle but not critical. Height is non adjustable. However, despite lacking height adjustment, the level of adjustment and build quality are excellent for this price, so it is the reason I am giving it 5 starsView Detail
Made for 155bbk and almost as quiet as OEM. The quality and construction is very good and looks equal to more expensive exhausts, and the design appeard to be very durable. Initial assembly and fitting to the scooter takes 15-20 minutes because the bracket requires careful alignment and is difficlt to do by yourself. Overall this is a high quality product and would recomendView Detail
Very good, high rpm torque is greatly increased at the expense of slighly diminished low end torque, can maintain a high speed and accelleration even up hills. The parts are of very high quality. A fuel module was installed in conjunction with this upgradeView Detail
Very good improvement over stock. The clutch engages much better at low speed and increased acceleration. The top speed was increased by 6km/hView Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송