After purchased upgrade Power Pack from Kitaco. I really concerned about oil temp while motorbike is operating , This stick should be suit for that and very informative.quality build and pretty accurate oil temp. very satisfy with this product so far. Recommended for Grom user
fit quiet well and the thermometer works great. quite useful for my bike (grom) since it does not have any temperature gauge. quite hard to figure out if it needs a break or what not during long hours ride. great productView Detail
I bought it not to actually see the temperature, but for a sense of style I bought it for the coolness, not to actually see the temperature There is one, but it has been used with no problems with OEM diversions The oil temperature meter, which is crucial, is 55 degrees when driving 20km at 28 degrees outside It doesn't go up as much as it should Is it still a decoration? It's like Unfortunately, I noticed when I opened it new that it had a Wound around 0 degrees and the color was peeling off It was very unpleasantView Detail
Daytona's dip stick is fine piece of engineering. It has a temperature gauge for checking engine oil temperature. I like the quality of product and its look when gauge is installed. One small disappointment is poor oil level marking. The dip stick only have one line instead of marking for min and max. oil level View Detail
Fitting On: SR400Different: Monitoring oil temperature at anytimeOpinion: Good build quality and appearance at any angle, easy to view, highly recommendedView Detail
Приобретал для HONDA SUPER CUB 50 CUSTOM.Артикул детали: 93339, производитель DAYTONA.Заказал данную деталь, так как давно хотел себе её, чтобы видеть температуру масла. Конечно, можно ездить без неё и она по большому счёту не нужна, но мне нравится, когда видно какая температура и можно контролировать работу двигателя. Всё устанавливается штатно, приятный аксессуар для любимого мопеда.В комплекте нет резинового уплотнительного кольца (рекомендую производителю его прикладывать в комплект) - установил его дополнительно самостоятельно. Кольцо можно переставить с масленого оригинального шупа либо заказать дополнительно - артикул детали № 270818.View Detail
APE100 엔진이 고회전을 퍼포먼스 내주기 떄문에 장거리 주행을 하면서 언제난 참고 하고 있었습니다 100°C 확인하면 pull over 하고 온도를 내려가는것을 확인한후에 주행하고 있습니다 지금은 SP TAKEGAWA : : Special Clutch Cover Kit 를 설치했습니다 그래서 친구 APE100 에 설치해주었습니다 ----------------------------------------------------------Since the APE100 engine performs the high rotation, I was always referred to while driving a long distance, so when I checked 100 ° C, I was driving after seeing the PULL OVER and down the temperature. I installed it in the APE100 Powered by Google TranslatorView Detail
I installed it the first time and the dial was not straight. It took me a little bit to figure out that the dial is held by a circlip and after using a circlip pliers I was able to rotate the dial in the correct position. It looks so much better than the stock black oil tank cover. As it is made of metal, it gets more hot than the original cover. Be careful not to touch it when you just came from a ride. I'm not sure the if temperature reading is accurate but its definitely consistent. Under hard riding it gets to 100-110 degrees. Moderate riding puts it just about below 100 degrees. It would have been better if there were clear markings on the stick so you can use them to establish normal oil levels for your bike.View Detail
I got Yoshi pipe using it for a while and realized that many owner of yoshi pipe recommended to use this filter, suck up the good air and released on Yoshi exhaust , It's perfect!View Detail
This cover aluminium made MSX shine! I don't like the black metal cover from stock one as it's not get along well with overall dressed up of my bike also I purchased with aluminium tappet ( as in the picture ) , really appreciate the well made of this partView Detail
At first I was thinking about to upgrade performance ,but I didn't want it to be that high.I decided to buy this pack to be just moderate upgrade and it wont need to install more additional part. This pack will give a performance boost at 2nd gear RPM though 4th smoothly RPM has come quicker over stock after a proper setup I tested high speed , got around 114 KM/H ( I have RS-2 Mini Yoshimura exhaust ) and that still have more room to gain . I really recommend anyone who want a moderate upgrade level , you don't need to buy Oil cooler or clutch cover , and fuel consume level is still the same as stock View Detail
If the stock plastic one looks pretty bad , This should be a good replacement.I pick the black color just because to make bike look clean.The material quality is top class! very solid build and fit to socket perfectly.View Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송