Although it had equipped also with before, it changed to the product made from nitro racing this time. Since white was used, there is impact considerably, and the degree increased custom. Although the engine protection at the time of a fall is the purpose, it is recommendation also as one of the custom parts.View Detail
The Engine Mounting Bolt must be removed for installation, so it must be supported from below by a jack or something similar. I think it would be safe to ask Shop In my case, I like the Normal look and it took me a long time to cut the Under Cowl!
Quality is adequate, Bolt is a bit cheap It is similar to those made by DAYTONA, so if you want to make a statement, you might want to choose Babyface, Striker, etc.
One word of caution. Quantity:Pair (for Left and Right) The length of the bolt of the "Bolt" is different from the length of the "Bolt" of the "Bolt". There is no Instruction Manual.View Detail
If you have a custom car that doesn't look like it was made in the 70's, it's probably not a good idea. I think it's still one of the less assertive products in the same category. I've lost a lot of weight recently and don't have confidence in my physical strength, so I put it on for now.View Detail
I thought it would be best as a Z series Slider with a sharp design, but After I thought I didn't have to install it in the first place, I became aware of completely unnecessary Items It might be better to have it for Circuit driving, but is it necessary for those runs? That said, it's not essential
After using it for a long period of time, I think that the slider part of the resin has become white This may be a problem of the material, but it is not so much the raggedness as the body of the car It bothered me because it made me feel cheap
I don't have any problems with the workability of the installation, so I think it's something like this I have no choiceView Detail
Mounting in Z1000mk2. Compared to products of other companies, it is cool and cool. Regarding performance, I do not want to experience it... If Moriwaki and Slider Lineup for Z are available, I would like that, but as far as I am watching TOT I think that people who are using it so much are probably OK. (It is something that Sanctuary made)
I do not care, but at the time of high-speed touring, something will come in just the right position to throw my legs forward.View Detail
The Radich NX open face helmet is well made and comfortable to wear. Webike and OGK website both state the helmet is JIS certified, but the only sticker I can find is the PCS/GS logo.View Detail
The \"TNK Sera ANDF scan over\" fits on top of the standard Suzuki Katana 1100/750 anti-dive modulator replacing the brake fluid pressure actuated hydraulic plunger arrangement of the standard factory ANDF. The central screw and lock nut allows for compression damping of the modulator to be manually set, otherwise the compression damping is too light. Progressive springs should also be used in conjunction with this item when the ANDF is disconnected. The units are well made and machined from billet. Although the site quotes these as \"per side\" the box (see photo) contains two units one for both sides. Having ordered a set for each side I now have an unrequired set.View Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송