These nuts are well machined and fits perfect.Made of stainless steel they will not rust like the stock ones, and that will make them easier to remove later
I did not purchase it here, but went to the PMC store on Awaji Island to purchase it after Touring.
Of course, it is used for ZEPHYR1000.
The NORMAL is made of steel with silver painting, but it rusts very easily.
Material:I was wondering if there was anything that would make me look good, even though I am replacing it with a Titanium Exhaust System.
I came across this product when I was looking for it.
Installation is easy as it is just a matter of replacing it.
(Thread compound was applied to prevent galling with the stud bolt before installation.)
The outer diameter of the nut is thinner than that of the Normal nut, which looks better and is less likely to interfere with the frame or exhaust system flange.
Ease of maintenance has also been improved.
I am very satisfied because the shine of the Stainless Steel is shiningly different and looks completely different.
It may be painful to spend 6,600 yen for 8 Screws, but I hope they will be rust-free and maintenance-free.
If you think about it, the effect is Large.View Detail
- Material : It does not rust with All Stainless Steel - As it is a Slim body, it is possible to install a wide variety of Exhaust Systems - As Hexagonal Wrench is available, installation becomes easier - Brightness directs luxury - A little lightweight
Demerit - Worried about sticking - Worried about strength
For people who do not like to rust, I feel that it is a product with high Cost performance. Screw size(M8-PC1. 25) If it matches, I think that it is available to other cars.View Detail
It was thin than expected. Since a raw material is a stainless, there seems to be no problem in reinforcement. Although it is used instantly, I purchase and think that it was good.View Detail
It is touch somewhat long at a pure twist thin figure. Since it is a thin figure when it attaches, a crevice is made between mufflers and it becomes easy to polish a muffler to a root. Since the bolt itself did not rust, it could do glitteringly to the root of a muffler and became being.View Detail
I did not purchase it here, but went to the PMC store on Awaji Island to purchase it after Touring.
Of course, it is used for ZEPHYR1000.
The NORMAL is made of steel with silver painting, but it rusts very easily.
Material:I was wondering if there was anything that would make me look good, even though I am replacing it with a Titanium Exhaust System.
I came across this product when I was looking for it.
Installation is easy as it is just a matter of replacing it.
(Thread compound was applied to prevent galling with the stud bolt before installation.)
The outer diameter of the nut is thinner than that of the Normal nut, which looks better and is less likely to interfere with the frame or exhaust system flange.
Ease of maintenance has also been improved.
I am very satisfied because the shine of the Stainless Steel is shiningly different and looks completely different.
It may be painful to spend 6,600 yen for 8 Screws, but I hope they will be rust-free and maintenance-free.
If you think about it, the effect is Large.View Detail
- Material : It does not rust with All Stainless Steel - As it is a Slim body, it is possible to install a wide variety of Exhaust Systems - As Hexagonal Wrench is available, installation becomes easier - Brightness directs luxury - A little lightweight
Demerit - Worried about sticking - Worried about strength
For people who do not like to rust, I feel that it is a product with high Cost performance. Screw size(M8-PC1. 25) If it matches, I think that it is available to other cars.View Detail
It was thin than expected. Since a raw material is a stainless, there seems to be no problem in reinforcement. Although it is used instantly, I purchase and think that it was good.View Detail
It is touch somewhat long at a pure twist thin figure. Since it is a thin figure when it attaches, a crevice is made between mufflers and it becomes easy to polish a muffler to a root. Since the bolt itself did not rust, it could do glitteringly to the root of a muffler and became being.View Detail
These springs are not listed at Ohlins for the Zephyr 1100.Its listed for the zzr 600 1991-92.They are 65 mm longer than stock, and there is no instructions about cutting the spacers.As it is I feel I wasted my money buying this kit.View Detail
I am a bit disappointed with this product. Even if the quality is very good it don't fit.It is about 20 mm too long and have to be modified to fit.You should not market this product for Zephyr 1100 before you make an axle with the right dimensions.View Detail
Installed this kit on my Zephyr 1100..It was pretty easy and everything fitted perfectly.Instructions were good, and there is a video on youtube.The valves were a little long, but no probView Detail
I got the natural aluminium filler cap and it looks really good.Beautiful finish and came with a new rubber o-ringThe two drilled holes give a nice racy lookView Detail
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송